Ok, since as far as I'm concerned I'm the ZZB uncrowned king (6) I wonder if with with this new engine I'm building I'd use I should use an OEM...
Has anyone played with the gear ratios in the tune? What I'm trying to accomplish is to bring the speedo closer to the GPS readings but I don't...
Does anyone know if when acquired new these heads come with all required parts? I see that on some web shops they come without the camshafts and...
So after wasting about $1500 trying to diagnose the issue here:...
So back in June I had a catastrophic engine failure caused by some work we did on the factory intake manifold: VTCS removed and slightly ported,...
With the SouthBend flywheel we need to torque the flywheel bolts at 3/4 of the factory spec (90Nm instead of 120, or like 66lb*ft instead of 90)...
As some people who came here from the MSF know, I've beed searching for a solution to quicken the steering for quite some time now. I finally...
Right now in my engine I have the SP63 provided Mahle 4032 alloy pistons. I directed one of my friends to them and got a set for his speed3, but...
Recently we had a motor letting go out of the blue. There was absolutely no sign of it having any sort of issue, the engine was sounding well and...
So I've been trolling Eonon for a few good years now about a front silver face for their units and finally someone from them managed to respond....
I need a WMI kit for my CX7 and initially I wanted to get another Cooling Mist Stage2+CMGS as I have in my 3MPS. But the Cooling Mist site seems...
I'm trying to make my cars a bit peppier down low by trying to spin the turbos a bit faster in those RPM intervals where they don't do anything or...
Since they were released I was always thinking to get a pair of front calipers from CS. However, as you all know they're released in Blue, Red and...
Separate names with a comma.