Post a log when you get a chance.
https://www.ebay.com/p/Air-Charge-Temperature-Sensor-Wells-SU2105/74522856?_trksid=p2047675.m4099.l9056 [img]
I should say, rather, put the code I posted into excel and use the data / text to columns function and then paste into the map. Good luck guys....
The car is going to change the IDC based on RPM.. although I'm not sure that is exactly what you were asking. You can copy and paste that code...
I think a part of the issue is that when the small blips of KR are occurring, the car is adding fuel, and that is included in your analysis and...
What is your max IDC set to in VT?
I'm not going to convince Ryan that his posts on FB are irresponsible, and he won't convince me not to point that out, so nowhere. I really...
Neganox, I am never one to discredit someone doing something good for the community.. I don't know that you see the FB posts, but a responsible...
Swirl marks on pistons, car is leaning out to 13 afr... That isn't a 500 hp car. That is a dyno queen for 1 run. Please guys really. t3 flanged...
Your posts are irresponsible, no log from the dyno, and you admitted to looking for attn with your posts. Are you finished trying to make it as...
That is pretty accurate, but again, just like always you forget the point of contention, and that Cory posted his car made 370 on 20 psi. I don't...
lets see a log of the car making 360 hp on 20 psi. Produce that, the log and I will agree that the car made 36x hp on 20 psi. My point of...
Phil, if you are over my way, and buy the parts, I can cut and bead roll a custom cold pipe for you in an afternoon.
So where are you @ with this experiment James.. because I really have to try to put my mind around what exactly the question is now.. Is the...
The other local claims the car is making 370 whp on 20 psi, but the car isn't running 20 psi. Just because the boost targets in the map are 20 psi...
Again Enki, and my apologies for saying so, but you are a convert to Versatune.. which, imo makes this particular venture even more of a niche...
I'll refute it for 2 reasons. Those following this whole circus remember that the original post was a dick swinging post about making 400 hp on...
New Ryan, with any due respect to you, and all due respect to Enki, let me address your tag if only briefly. I understand what you guys are...
Ryan, with any due respect to you, and all due respect to Enki, let me address your tag if only briefly. I understand what you guys are trying...
Not a fan of revving the cars I tune above 7500 on the stock block.. and until it is necessary (I have someone hellbent on breaking some sort of...
Separate names with a comma.