-
-
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Welp, I totally touched it per instructions here.
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Oh, nonono. I did a O-Ring rebuild as well as replaced the HPFP internals. They sent a rebuild kit for free with the HPFP internals. If...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Alright, I got a chance to speak with someone from Corksport. After taking a look at my symptoms, they deduced that I probably messed up...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.That's correct. It seemed like a perfect fit. No hitching or binding in and out. After disassembly, there appears to be some wear on the...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.First: I fixed it. I replaced the whole HPFP with an old stock one that I had, and seems to have done the trick. I am unsure as to what...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Naw, no fuel smell. Further, if it were a leak, I don't think fuel pressure could vacillate between 1600 PSI and 70PSI. It would...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Oh, well that makes sense. I wasn't sure how the fuel pressure would continue to ruse while the engine was off. Alright, well I've got...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Alright. I have replaced the PRV with a used one from another vehicle. I have disassembled and cleaned the HPFP. After starting and...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Well hey, thanks for your help. I'll report back with new logs after I replace the PRV
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Thanks for the ultra quick response! The needle in the spill valve can be pressed in with the tip of my finger with no resistance. The...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Alright, I opened up the HPFP. There was no gunk to clean. It's basically brand new. I haven't put even 100 miles on the car since I...
-
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.Well alright. I'll pull it tomorrow and see what's going on. Edit: to be clear, the red line product you referred to is this stuff...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.The car actually feels pretty good until it warms up, though there's a bit of a stumble still. It seems to idle and respond to...
-
_UsUrPeR_ replied to the thread 2006 Mazdaspeed 6 bogging at boost.D'oh. Check the photo again. I attached after posting. I did a full disassembly and cleaned everything less than 100 miles ago on the...
-
-
Loading…
-
Loading…
