Read this thread from beginning to end. So sorry to hear this. But looks like your not a quiter and you'll get this all sorted out!
It has been running a couple weeks now, my issue was the injector harness itself. It wasn't connecting with the pressure sensor properly. But...
Just an update, changed pressure sensor again with the injector harness and that seemed to take care of my issue. Drove it for about 10/12 miles...
I'll look into that. Like I mentioned before, I'm not electrically inclined as far as diagnosing those kind of problems. I do know that when I...
An update for today swapped back the hpfp pump with the autotech internals, checked out the rail and the hardline going to the rail, didn't seeme...
I don't believe so, and the crank pulley is the stock mzr
2.3 ecoboost I am using one in my motor. Motor seems fine, just can't figure out p0192 code.
Thanks. I'm sure it's in there good as I unplugged it and plugged it in a few times. Plug and sensor look good to the eye, or my eye at least....
So after installing a new (built) motor, can't seem to get this P0192 code figured out. Fuel rail pressure sensor circuit low input. From what I...
Oh, I have, but will be checking everything again. I know the wire isn't that long and goes straight to the fuse box under the hood I'm talking...
Thanks for the info. I ordered the filter from the dealer and it was in the next day. The car starts now, but won't stay running unless I hit the...
Wasn't the problem. Pump out of tank flows fine. Pump in tank, even with 12v and new filter, doesn't flow. I can hear it spinning, and...
Grounds are good. 12v to pump I can hear it come on and stay constant (320lph aem in tank), but hardly pumps gas coming directly off the top...
Got around to installing my motor but now have a fuel issue. Hpfp pressure reads 0 on the accessport. Gonna dig in today and try to find out why.
Separate names with a comma.