I have a 07 CX7. I have taken the engine out and rebuilt it. New pistons rings, new VVT sprocket, new head gasket, new crank shaft position...
Hey guys! Hope yall are doing well :) I have been rebuilding my motor for about 5 months now XD taking a wile as I am also trying to get a degree...
Good Day All, Pretty sure this is my first post here. I have had a 2013 Speed3 since about 2017. it is the Daily Driver with a few upgrades. My...
Hey guys, so I'm scratching my head on this 1. So I started noticing some similar issues to when my last map went bad; high koeo voltage,...
Hello All, Not sure if this is the right place for this post but I thought some of you would be interested to see the failure of my recently...
It rained a couple days ago and I forgot to wrap my intercooler when I went driving. I got home and started it a couple hours later, white smoke...
Hey there, I’m having a problem with my 2008 Speed 3. When I’m travelling along the highway with cruise control on and I go on a slight incline,...
Hey All, I just purchased some parts finally from Corksport. 3.5in intake, CBE, DP, AP V3, Fuel Internals, BOV, Turbo Inlet. My car is a 2011...
Hey everyone, New here. I have a 07 speed 3 with full bolt ons and i bought a 2nd gen motor from a friend and just got it hung in the car. I...
Hello everyone new to the forums and the mazdaspeed life, I apologize if this has already been solved in another thread but I couldn't find it. I...
Got a whining sound in my 2007 MS3 GT. Car is fully warmed up, only whines while driving under load, approaching or at WOT load in all gears....
Here is how I attached the Harbor Freight Engine stand to the motor and it worked out well. Here is how I mounted it. [IMG] You will need 3...
Separate names with a comma.
