About 2 weeks ago I bought a 2008 Mazda speed 3 with 184xxxkms. Test drove it and all went well. On the drive home the bov came out of the hose,...
I am installing a new Cobb SF intake on my car and I don't have the correct connector because my car came with the metal mazdaspeed intake...
Hello! I have been searching for advice on how to fix this all over the internet, and to no avail. Any information or things to test is greatly...
I am burning about 1 qt/1000 mi or more and I'm at a loss at to what to do next. It's definitely coming out of the exhaust, it will smoke during...
[2012 Mazdaspeed 3, 140,000 miles, Bone Stock including the tune, Bought brand new, single owner, drive like a grandma with weekend Italian tune...
New to the Mazdaspeed 3 Space and as usual with buying cars you think are gonna be awesome their are always flaws. MODS: Cork sport HPFP, HPS...
Year/Make/Model: 2011 Mazdaspeed 3 Mileage: 106700 Location: Wheaton, MD Concern: Underboosting after exhaust leak repair DTC's: N/A...
Hi all, new here. I have a 2007 speed3 with about 127k miles. After about 30mins of running or when car is warm, the car idles weird in neutral...
Ok so I’m having a p0300 code on my 2008 Mazda 3 -after market exhaust, air intake, and tuning -rough idle and cold start -replaced cover head...
I have a 2006 mazdaspeed6 BONE STOCK. Around 3500 to 4000 rpm the car hesitates and stalls almost as if the car is literally turning on and off....
Hey guys, so I'm scratching my head on this 1. So I started noticing some similar issues to when my last map went bad; high koeo voltage,...
My genpu has a rough idle where it makes a small sputter every few seconds, I also get a p0300 random misfire code that comes on every few cold...
Hello, i just installed my bnr s3 and i'm running intro one issue. My stock turbo ran without any issues on 300hp. it barley makes 3-4 psi under...
Hello guys n gals, im about to buy a mazdaspeed 6 built in 2007 with close to 200.000km on the first engine and turbo priced at ~7k € wanted to...
I recently sold my speed3 to a buyer and disclosed known issues, which were just the piston rings on cylinders 1 and 2 being worn (not terribly)...
I have been having some issues with my 2007 Mazdaspeed3 for about the past two months. The issue: When accelerating (not even very much) the car...
This is my first post here so I apologize if I mess anything up! (For reference, currently have a jbr stage 2 powerpath intake/turbo inlet,...
Hi, I bought my 2009 mazdaspeed3 about 8 weeks ago, it ran when I bought it but needed a timing chain job. After doing the timing chain myself...
Hey all, I'm new to the site so sorry if this has been asked before. ( i searched and couldn't find anything.) My 2009 Mazdaspeed 3 is having...
I want to buy a 1st gen speed3. I know they’re older cars and I don’t have a crap ton of money. I’ve been considering 2 options which are either...
Separate names with a comma.