Recent content by Bighern9999

Did you find out the problems for this?

Here on the new data logs I just did today. I think my MAF sensor is starting to go.

I checked all clamps and hoses and there is no visible leaks. I spray water on the hoses for any possible changes in idle. Didn't find anything.

Thank you

I've been restoring this 2006 MS6 that I have gotten earlier this year. Poor thing has been neglected over the years and MS6 I have always wanted to own one my whole life. My STFT and LTFT on my sensors were stuck at -.16. So I finally got the funds to replace the O2 sensors and now my dilemma...

I have only one, so the vehicle needs two keys to program the fob.

So since I bought my MS6 I have not been able to use the key FOB. I have a tried to the procedure but will not go into program mode to to learn the KEY FOB.

Well I fixed the issue, found that the tires were the culprit. The tires were worn different causing the rear diff to go haywire. Rotated them to the front and it’s good now.

Good morning everyone, I recently changed out my rear differential mounts on my MS6 with the upgraded ones from cork sport and sure juggernaut front diff mount. After that I heard an audible and vibration at the rear section of my car almost like a thumping noise, almost like the rear diff is...

So I changed out the PRV and rebuilt the HPFP with auto tech internals upgrade. No more misfire and running good now. Thank you guys.

Good morning everyone, so my MS6 was driving just fine when I came to work but now the 4wd light is blinking after I pull into my job. Didn’t feel anything, and showed no codes. Anyone have some pointers on this.

@Awafrican , Here is the log with the car warmed up and under load. I'm confused, my o2 sensors are not adjusting they are stuck on -.16% both short and long term fuel trim. What else could be missing?

Hello, so it felt better since I got the Fuel rail pressure sensor, but feels like it lacks gas when going top end. I just bought a COBB access port and got it shipped next day. I got the data log sheet and here it is. My HPFP stays at 500 or so at idle, and only 1200 psi when throttled it. I...

Good evening everyone, I just bought a speed 6. Got it for 2k and loving it but the problems started coming out. So I have the standard oil consumption problem, also had a p0192 for fuel rail sensor and p0300. Changed out the sensor and code went away, I cleaned the EGR assembly and tube for...