Latest activity
-
DISIFTW replied to the thread Hpfp concerns.Also, if you are unsure about mods then post a couple pics of the engine bay so we can try to help you out. If there's any mods you'll... -
Enki replied to the thread Best Engine Oil - All Mod Levels.Adding this to the OP: -
Crazycanadian replied to the thread The Factory serviced 2nd life..Great build you've got going on. All though it's the wrong color the paint looks great. I noticed you talking about exhaust scavenging...
-
Swap the oil, 23psi on not good fuel pressure is bad news so stop boosting period until you figure the issue out. ITFP stands for... -
What oil are you running? If it's not on the best oil thread, swap it out and do a 1000 mile change after with the same stuff. Also, you...
-
Mauro_Penguin reacted to Crazycanadian's post in the thread "Princess" A Mazda 323 like no other. with
Like.
This week has been slow. But we do have some data. Before we get to the spread sheet and graph we've gotta dive into some technical... -
SyntheticAtmosphere reacted to Crazycanadian's post in the thread "Princess" A Mazda 323 like no other. with Like.
This week has been slow. But we do have some data. Before we get to the spread sheet and graph we've gotta dive into some technical... -
DISIFTW replied to the thread Hpfp concerns.Swap the oil, 23psi on not good fuel pressure is bad news so stop boosting period until you figure the issue out. ITFP stands for...
-
Mazi07 replied to the thread Hpfp concerns.I’m using Mobil 1 5w-30. I’ll have to take a look at that thread. I’m usually around 12-15lbs of boost but according to the ap I’ve hit... -
I have a lot of things piling up at the moment.. need to sand down the primer and get the hood ready for vinyl wrap. The vinyl wrap...
-
Enki replied to the thread Hpfp concerns.What oil are you running? If it's not on the best oil thread, swap it out and do a 1000 mile change after with the same stuff. Also, you...
-
Crazycanadian replied to the thread "Princess" A Mazda 323 like no other..This week has been slow. But we do have some data. Before we get to the spread sheet and graph we've gotta dive into some technical...
-
-
SyntheticAtmosphere replied to the thread brandonf speed6 bt build.Are you applying paint before wrapping? Vinyl dosent adhere well to primer. Plus, If you paint it will need time to cure and offgas...
-
brandonf replied to the thread brandonf speed6 bt build.I put the spring in ages ago, but I had a 4 port ebcs hooked up at the time, so I think an 8psi spring. I'll double check when I take... -
Enki replied to the thread brandonf speed6 bt build.What spring do you have in it that requires 35% WGDC? On the EFRs, the wastegate flows so well that you need about 40% WGDC to get to...
