Recent content by Dr Tal

someone should change the NGK LTR6IX-11 to just NGK LTR6IX for stock heat range with a close to proper gap. the NGK LTR6IX starts at .032 gap size which is easier to get into spec than the NGK LTR6IX-11 which has a stock gap in the .040~ range

Anyway to modify the brackets if using a 34mm based injector?

nope. with forscan you can add new keys to the system without having 2 keys. with both the rke and pats system. i added a new maser key that i had cut with it, if i had a new oem key i can program it though if the rke module is crappingg out id have to replace the thing similar to the ecu...

Hey question does this work if I have to replace the modules for the rke system? Having a hell of a time getting my remote keys program and working with keyless ignition and keyless entry. I swear it's just one of them antennas but there is no way to tell which is bad if there is no code for it...

speaking of sounding like a diesel should hear my car.(2.5 swap) not to completely necro a old thread but what do you think of running an aftermarket exhause cam (since all the duratec exhaust cams are the same) with a stock intake or reground intake cam + 50* vvt gear. with upgraded springs ofc...

Does anyone have the pids for our car to read bat,kr, actual afr, etc. I'm trying to just add them as custom pids for torque pro app. I have the Mazdaspeed plugin for it but the app or plugin keeps glitching and deleting the pids from the list and it's not showing up in the predefined pids list...

if you get anywhere with this let me know. Ive been looking into something similar or a different variation of a 6th port. I ran into someone that basically had the the 6th port welded onto a cold pipe for the 6 I want to try something similar but use weld in bungs and direct lines instead of a...

Id rather go PI but i cant run tmic with any proper pi setup. Freektune used to make 6th port kit but out of stock. The speed performance kit seems a bit over priced and doesnt come with what i want. I can always port the intake mani to get a bit better flow. I dont have the budget atm to...

So while trying to do as much research on aux fueling(and frying my brain at the same time) for my build. My goals are 450whp on 93. Im trying to find a solution that will work with an ETS Tmic/cst5. Most PI Setups need to switch to Fmic. Im Trying to avoid meth if i can(Still an option) and I...

Ok so been a while since last update and rebuilding the speed 6 got put to the back burner for while cuz of irl stuff. New build will be a built 2.5L bottom end swap instead of just a general swap still looking for about 450whp on 93 as a first goal with options of going to 600+ down the line...

This is the start of my build thread. So lil back story. Bought this car a year and a half ago to be a fun daily that can get through the winter easily. Kept the car stock, changed my oil regularly with 5w-40, got vvt/timing chain done. Was going to do minor upgrades, nothing to major since this...