Recent content by Jabarov

Hello. While installing Intake, I broke the OEM boost control solenoid. I purchased a Grimmspeed boost control solenoid. I'm making a two-port connection. Are the hose connections good like this? Can air cause the hoses to kink or fold

Thank you.

I don't understand everything because my English isn't good. I'm sorry about that. I bought the Damon kit. I'll delete the pipe and the EGR valve. I hope this is better than unplugging the EGR. I chose this method because there could be an air leak.

Thank you. I was actually going to unplug the EGR, but some people mentioned that there might be an air leak from the EGR. So I bought a Damon EGR removal kit. So, I'll remove the pipe and EGR and install the Damon kit. But if I don't pass the inspection, I'll reinstall the EGR. Then I'll...

Thank you. Since I purchased the EGR removal kit from Damon, I'll be removing the pipe and EGR valve completely and installing the Damon EGR removal kit. I think it'll be better than just unplugging it. If I don't pass inspection, I'll keep the EGR. Can you tell me what type of silicone I...

Thank you. Is it bad for the intake manifold to remain open? If I pull the EGR plug, won't the intake manifold still stay open? @Easter Bunny

Thanks. I purchased the Damond EGR removal kit. I will remove the EGR valve and install the Damond kit, but leave the pipe in place. I will reinstall the EGR valve before the vehicle inspection. I was going to unplug the EGR, but the valve might not close properly and leak air. That's why I...

Hello everyone. This week I removed and cleaned the EGR and its pipe, and installed a new gasket before putting it back. I’m planning to delete the EGR. I want to unplug its cable, but I might also buy the Damond EGR block kit, remove the valve, and install Damond’s plate there. Can I leave the...

Thank you.

Thank you. Thank you. If I unplug or delete the EGR, I don't need a calibration for that, right? I'll unplug the EGR and see how the car reacts. If I don't like it, I'll plug it back in.

Thank you. Sorry for my English, I'm using translator. If unplugging the EGR works, why do people install a metal plate to remove it? If I unplug the EGR, will exhaust no longer enter it? If I plug the EGR back in during inspection, will the engine light turn off?

Thanks, guys. I removed and cleaned the EGR today. New gaskets are on their way; I'll install them when they arrive. The EGR was very dirty. Do you recommend that I unplug it and use it, or should I use it plugged in? When I install the EGR exhaust pipe, do I need to apply silicone? What type...

Thank you. I bought Damond Street

Hello. I'm buying a rear engine mount for my Gen 2 Mazdaspeed 3. Which one do you recommend? CS Stage II RMM or Damond Motorsports RMM? I looked through older threads and think Damond is more popular. If I buy a Damond, which one should I choose: street or race? Thank you. I have another...

Thanks guys. If I'm not going to delete the EGR, do you recommend cleaning it? Is it worth the effort?