Recent content by Mosbey

Hello All, I have a ms6 transaxle question, I wanted to somehow turn this into 2wd and position for a mid engine rear wheel drive. I have removed the pto and was wondering when I somehow seal up the output where the pto was and reinstall the intermediate shaft will that give me 2wd with all...

Hey I had the same issue and I messed with injectors, fuel pump, and fuel press tx and fuel press relief valve and no joy! The fix was when I realized some injectors were not squirting (no change when coil removed and dry plugs) hence high HPFP press way too high all the time. Then I...

SOLVED. I was overwhelmed focusing on high fuel press at idle and above ! Back to basics and found no change when one coil removed (no fuel) causing misfire and fuel press increase . Found fuel injector drive module with dissimilar metal corrosion from mount bracket and aluminum case...

Its been a while since I changed plugs,I am going to try that, it can't hurt .Seemed like a lack of fuel but viewing the log everything seemed to happen at the same time? I have a couple used fuel rail fuel press transducers any one hear of those failing? Also is it possible to have 60psi at the...

Hello, I have a speed6 with the following mods: STOCK TURBO .VTCS delete (flaps and shaft removed),stock intake opened where restricted,EGR delete/homemade catch can,XS POWER HEADER,3in catlessDP,to stock exhaust,AUTOTEC fuel pump guts ,3.5 in MM FMIC,cobb turbo INLET and SF intake.Stock BOV I...