Recent content by robander3

No codes, car right everything was working fine. I did but a used one off eBay for less than 100. I was able to reprogram with FORScan. Do NOT delete keys already on the new PCM just add keys to it. Do you hear the relay click on/off? Are you sure it's not the low speed resistor? Or bad...

I had to replace my PCM. Currently re-programming keys using forscan.

Using ForScan I can see the PCM trying to turn on the Fuel Pump Relay when I turn the car on, while I'm cranking, and a few seconds after I stop cranking. The resistance when the car is off I get a resistance of about 490k ohms. When I turn the car the on I get about 27k ohms, while cranking I...

I've verified that the wire grounding wire between the circuit relay and PCM is good. My Fuel Pump Resistor is at 0.4ohms. I have also bypassed that (for this trouble shooting). I haven't been able to verify the PCM goes to ground for the circuit relay, but it does for other circuits so I have...

I've been having this issue for a long time and I haven't been able to find any resolutions. Looking at the fuel pump circuit diagram (Page 50/0114-2 of the wiring diagram). It looks like the low-pressure relay isn't grounding out thru the PCM upon startup. I have NOT checked to see if the wire...

I came across a wiring diagram for the Mazda6 MPS, I'm thinking its got to be similar enough. So I'll start tracing things out with this. I do have the entire document which I'll upload separately. EDIT: uploaded the wrong part of the wiring diagram.

The one for the low-speed fuel pump setting (bolts to the frame under the TMM)? Yeah, that one is working correctly, I've even jumped/bypassed that one to make sure.

New to the forum, figured I' put together a build of my speed6. Or more so the destruction and rebuild of my MS6. I purchased the MS6 in January of 2014, it had ~60k miles on it. Came with a CP-e FMIC, Full exhaust (CP-e?), HPFP, CobbV2, and a Mazdaspeed CAI. The first thing I did was...

I use to have a bunch of stuff over on MSF, but that got nuked at some point I guess. I'll put together something eventually. I've owned the car since 2013. I'm going through the wiring diagram to try and see why the main circuit relay won't energize, it does have 12V going to it.

Hi all, I have an 07 mazdaspeed6. Currently not running (in-tank fuel pump issue) with a built engine/diff/transfer case. I'm using a GT3076r turbo. I'm located in upstate NY/Schaghticoke. -Rob