Search results

A friend of mine has as an RS Focus and he was looking at the Big Mouth so that’s what got me thinking so when l saw the opening with the blanking plate l thought bingo. I must say l don’t know much about how this would effect the air over the radiator but its used in the lower models as shown...

The hole is for a battery vent in the standard models, see pic

The other day l took off the RHS air scoop in the front grill that directs air up into the top mount and found a blanking plate on the plastic frame section under the air scoop (see pic's). I was able to easily pop out the plate with a screw driver which should now let a little more cold air in...

Thanks for the help and l guess and good blast of PB Blaster will be the way to go before starting out. I wonder if the stock studs will fit the thicker flange of the XS-Power manifold or you need to swap them out with longer ones, from his pic it didn't look ideal with the stock ones..

That cracked weld is none to cool :( Is that the XS-Power V3 manifold?

Cheers for the response, it's full on tight in the back and l know when l did the DP install it was a major pain.. I saw somewhere that you had to remove the studs to be able to pull the stock manifold out and l was wondering if that was correct and also what size the new studs were that...

Hey guys very interested to see the pics of the XS Power V3 install, l have just purchased one and waiting for it to be shipped so doing a bit of homework before getting my hands on it. I can't seem to find anything in regards to installing the manifold and would be way keen for some info to...