Search results

HELP WANTED on RPM SHIFT LIGHT As mentioned I'm still working to get the universal adjustable rpm shift light working in my diesel truck. As we found out, Cluster gauge doesn't have clear signal or any signal that even converted could work. We also found out ecu is not a good signal source too...

Replying: Unfortunately there is no private message option THE LAST INTERIOR MOD UPDATE PART IV - COMPARISON SO THE STOCK INTERIOR - photo from web And mine customed INTERIOR for now looks like this - as mentioned other Sparco updates later and I'll make these vents pieces black...

NEW INTERIOR MOD UPDATE PART IV - LAST I finally managed to one piece finish these hard Y covers for A pillars . I also did some finishing touches to the headliner and other pillar covers so the whole interior is ready to install - I'll give it time to harden adhesive. Tomorrow I'll put back...

Unfortunately i have none knowledge about ms3 but i think as long as the servo mounting threads will allign with ms3 you can swap the whole assembly - servo with M85 Pump along with spacer for leak proof working, for pretty cheap comparing to direct fit sets. Onto the mounting points. No ...

If you mean alcantara with already adhesive layer it is not real alcantara or if it is premade it would be expensive as hell and hard to stick. The only way is to get raw material and buy adhesive spray cans specially made for connecting materials. If you want headliner buy 3 cans , for whole...

NEW INTERIOR UPDATE PART III I'm mostly done , even with the hardest Y shaped pillars which were pain to shape This will be quick update so no large descriptions , just photos...

NEW UPDATE ON INTERIOR PART II I'm mostly done with everything, the whole headliner is glued, just need to trim it and prep holes Also while making i took my time making all of the trimming elements and boy they take a lot of time . Firlsty you need to spray the element with adhesive, then...

New Interior Update. Finally, i took some time and prepped the surface for alcantara. If you want to do it here's what you need to do: tear apart the old fabric remove those yello leftovers temporarily lay down alcantara now what you want to do is massage the material to help it to fit all the...

New Update Finally the rpm signal cabble was put through the engine bay i layed it nicely where the hood latch runs and it ended up behind the coolant reservoir. I only need to wire it onto fhe alternator and that should work. I removed the engine cover for better access and soon I'm going...

New Interior Update Today i took care of those seat belts tensioners Those are not removable so the only way is to paint them. Firlsty you want to extend them and close the doors to have a better access, tape belt itself so you don't paint anything unwanted (cover car too not create hard...

New Update on Interior mods Today i reassembled the hardest to disassemble and to paint parts which are these door hangers These are made out of this sleek plastic so painting them in a good finish and without the paint to come off from any scratch or even simply grabbing them as you should was...

Despite having non functional shift light I decided to make my interior more rally like. I dismantled whooole epper part of the interior which was salmon like colour. This was needed to be changed sooo... I ordered a huge 150cm x 10m roll of alcantara and bought a adhesive spray glue. Today i...

Red to battery positive terminal Black to the negative battery terminal Green to RPM signal Both Orange and brown cut if Inline 4 or 6 eng.

Ofc, i can try that

RPM Shift light update: There is no possible option to catch this 5v square signal from instrument cluster and ecu as i thought. One last option which I'll need to buy/build some kind of CAN-BUS signal or RPM signal converter from OBD port. Maybe I'll be useful for someone but In 2.2 diesel...

Maybe you're right. I'll still try the clear ECU signal and if it fails I'll try your idea with Arduino but to be honest i have no idea in programming area because i only mastered clear mechanics and if sth requires programming i try to browse it or i give it to my trusted friend who's...

New Update I tried to locate the tacho signal wire or rpm signal wire running to instrument cluster on dash but i failed , I measured the voltage of every pin on the socket with multimeter and taht gave me only 3 candidates. White-violet wire which usually contains rpm signal but it only...

Interior Mods Update. I Still need to find time for this rpm light cabble to connect. Now i installed proper rally gauge cover. And i installed sneaky switch for my previously posted f1 brake light. The reason for this mods are .... Yearly Inspections (In Poland they are as strict as in Germany...

Part II RPM Shift Light and wiring (Addco Gauges and rest) I managed to lay down wires. I mean i prepared installation for future electronics so made additional ground, positive and negative terminal wires and on + and - i wired this light so it will work but i don't need to strip everything...

Today's Mod (VERY USEFUL FOR TRACKDAYS) PART I RPM adjustable Shift light Job is simple for this part and requires from you only an esthetic trimming abilities. Firstly read all manuals as always So firstly we are going to simply CUT Brown and Orange Loop. THIS IS ONLY ESSENTIAL FOR INLINE 4...