Search results

PART 5 (Last) BATTERY RELOCATION I hope that my work will work and car will start everything will have normal temperature and will run smoothly. Despite that take some of the last photos of how to end it and connect everything Tighten the base to the trunk Clean ,remove rust and paint...

PART 4 BATTERY RELOCATION today I'm almost done, i preped mounting points and protected drilled area from rust with 3 layers. Let's begin First you want to mark holes and drill adequate sizes (in my case torx 12,9 8mmx25mm screws) for 8mm use 6,7mm drill and thread tap 8mm 1, 2 and 3'rd ...

PART 3 Battery relocation Mounting points are cut. I prepared new cabble from switch to positive terminal.Switch is mounted and the last thing to do is to connect fuse as close to the the battery as we can (max 30cm far from battery) , connect terminals then battery and finally mount everything...

PART 2 Battery relocation I only managed to lay cabbles through the prepared engine bay to the trunk. There is a need to slightly trim and sand interior pieces (Just cutting useless and unnecessary material that may damage wires while assembling) I managed to crimp one 50mm² ending on +...

Exactly, 2.2 I4, they will spool and yes, nitrous hit. Custom ordered forged components are ,,in progress,, and it is a matter of 2-3 years when i'll unleash that beast

I installed it because i do some trackdays, have oil cooling and always keeping+3k revs so it is necessary

PART I Promised update on wiring Battery Relocation - from engine bay to trunk- how to do it right First step is to disconnect battery mounts and pull it away. Then you want to locate wires you want , in this case there is one cable on minus paired with ground one and two cabbles on plus...

New update/ old update I promised to show u guys every previos mod i done that maybe someone wants to do but doesn't know how because fhere are no tutorials/instructions. The last one is Turbo Timer from HKS . What it does is after you turn off your car, your tirbine (IF IT IS TURBO'ED) is...

New Update/ Advice If you ever work on car project especially after watching thise how to ruin your car by stripping everything videos ,is quick show of how this makes no difference in stripping interior (I'm not taking about jacks , spare ect because these can be removed without breaking...

New update After Huuuuuuge break i found time to work on my car and i decided to do weight reduction in trunk space and to prepare it to some mods. First i cleared some plastic. Then i reorganized wiring and hid it behind panels . (some tip- if you want to unscrew something, here the wiper motor...

New update as brake swap is coming to the end nicely and everything fits here's the list for the CX-7 if you want same plug&play setup Brembo M85 054 Brake Pump M 12x1 to M10x1 reductions for brake lines x2 Audi A6 C5 Brake fluid reservoir Custom 49,85 to 45,75mm ring for pump fit and of...

One is for normal braking and the another one will be connected to e-brake

New update I'm finalizing Brake swap along with sport suspension. Now I'm working to get dual Brembo calipers per axle running so i designed new adapter for rear axle. As stock this element which is mounted between hub and knuckle is thin and has obviously only one caliper mounting points. I...

New Announcement/Warning for other tuning boyz / detailers. I made this mistake while cleaning wheels which caused them to debalance and provide vibrations on the steering wheel. I am describin the proces for you to not make same mistake. I generally use professional detailing chem which even...

New update, Today my Brembo M85 brake pump arrived, it is nearly twice as big as stock one so i think using industrial equipment such as lathe which i can use at my work will be needed. Pump is in this beautiful red box next to my front big brake kit setup . Now i just need to adapt stock servo...

New small update I did is nearly as my first mod so some long time ago but I decided to upload it as next mod to this build or in case somebody would like to do it in own car. F1 Brake light . Connections are (from device to taillight - color coding) COLOR CODING FOR MAZDA ONLY! YELLOW from...

New small update I'm done with the struts If somebody is thinking how did I torqued this ,, impossible,, nut on top using only torque wrench. The trick is simple. Set your torque wrench for 60Nm , grab apx. 30cm of transport foil aka stretch from a roll an form some kind of rope by twisting...

New Extra Project Update As a tribute or reward to my readers/wievers i completed the Brembo 18Z swap kit i will install with my sport suspension and lifetime zinc plated suspension parts. Previously I uploaded my set for front 2x Brembo 18Z 6Pot calipers + 350mm gt rotors and for the rear...

I'm done with assembling struts because i didn't have time to assemble them same day as i posted about how to assemble strut from scratch. A nice assembled strut should look like on attached photos (unfortunately my coil compressors despite covering spring with cloth , scratched beautiful paint...

Suspension is coming slowly together. Because i couldn't find new spring housings for sale i decided to buy used , sand blast them zinc coat them , paint them with underlay, and finally with black paint and temperature resistant black paint (waiting for them to fully cure). I also ceramic coated...