Search results

Bottom port has nothing attached to it. Drains into the basket. Port facing left in above pic has a hose attached to it with a 3/8 fitting to connect to the stock line that runs from the passive side of the tank pictured below. Sorry for the poop pics. I didn't really document the install...

And you'll need a 3/8 quick disconnect to hook up to the cross over line that comes from the passive side of the tank

Since hes using the oem feed as a return. He cannot use the stock siphon. Which is his issue. He'll have to get a radium venturi and run that as the return

Looking good. Doing any bowl work?

Hell, You can max the K04 on E30 with just hpfp, intake and a test pipe. Not on an ots+ map tho

Might be in 2023. The girl needs to get a solid year of experience at the hospital down here. Then we're looking to move. NE OH and Maryland are the top 2 choices as of now

Both the hpfp and firewall use the same 5/16 quick connect. You'll justt use a female -6AN fitting on the hose itself. Then screw em into these https://www.summitracing.com/parts/rus-640863?seid=srese1&gclid=Cj0KCQjw-LOEBhDCARIsABrC0Tn_YYw7euLXZE50xXC0YG-BD9QsPR1eumtaw4JV6tJ51pwtm6jzhK8aAo95EALw_wcB

I mean these pistons made 640+ with ease at 34psi on the same turbo the last time they were used haha

Hes not taking orders on the wire tucks anymore. I messaged him. Hes currently sold out of the map sensor adapters. But said to hit up jordan at overspeed for the map sensor itself

The ebcs should be fine. At the end of the day its just a mac valve like grimmspeed and everyone else uses. The map sensors have a pretty high failure rate compared to bosch tho. If you do decide to go with a different map sensor, hit up Eric at Mazdaspeed wire tuck. He sells the needed plug...

Oem mzr DISI crank since I have 2 in perfect condition. Otherwise, id grab an ecoboost crank

Its $65 from edgeautosport versus $250+ for the mazda one

Yep!

The time has come to finally get my built motor going after spending a year recovering from the previous machine shop fucking my block and sleeves and leaving me high and dry. Parts on hand: -2 spare short blocks with good cranks -spare head -Darton Dry Sleeves -King TriMetal pMax black rod and...

This will work 100% . the feed to the hpfp doesmt need regulated at all. Only the PI does. The hpfp will do fine with even as low as 15-20 pressure going into it.