Search results

Any updates on this? I’m curious to about shaving weight. Kinda curious if you done before and after weights and what all you removed

Well duh.

Never could get a good vdyno chart because of loss of traction. Couldn’t get a full dyno run for the same reason but it still made 675 on a Dynojet. Gen 1 MS3, Built block with Manley pistons and rods, jmf v2 , CS exhaust manifold , CS 3.5” tbe, CS cst6 turbo, CS 4” intake, sp63 stg3 cams...

Yes I personally wouldn’t worry about it at all but if you are concerned then just upgrade the rod bolts.

Been busy so I haven’t been online much. Figured I’d post an update. Car is up and running good but didn’t make the 700hp goal. It’s my daily when the weather isn’t shit. Dyno ended up being 675/540 so I’m happy with that. Traction is my problem I have to fix now. Overall I love the setup

More pics

Damn I guess I forgot to update this like I wanted to. Car is back together and running. Working thru the tuning process. I still need to finish up the wiring and clean up the engine bay. Most of the wiring is wrapped up and tucked wherever I could fit it u til I knew everything was going to...

Thank You. I know what it’s for I was just wondering if something goes in the hole to drain somewhere. Mine drains right on to the frame rail. Thought maybe there was an insert or something that would direct the antifreeze to drain somewhere else

I have 2 coolant tanks for gen1 and they both have a hole in the very bottom of the reservoir tank. It’s a factory hole but what goes in there? I’ve never noticed it before but I don’t think I’ve ever had one off until now. I’m talking about the overflow hole just to be clear.

Once again I didn’t get the motor put in or finished last weekend. Cam spec sheet called for .014ex and .012in clearance. I didn’t have enough shims to set them exactly to those specs so I called to see if there was any variance like +/- .001 and they informed me they set them up to factory...

I’ve had pretty good luck with my Xclutch. I put about 1000 miles on it before I started running it real hard and it was around 1500 miles before I started flat foot shifting it. I’m not at your power level but mine has worked good so far

Finished the orings today. Only time consuming thing I have left is setting the valve lash for the new cams and maybe freshen up the valve job. Going to check the valves tomorrow to see if any are leaking. Hoping to get this stuff done Friday night and assemble the engine Saturday morning. Swap...

Hell yeah man! The excitement has to be killing ya. I’m really hoping to get the engine swapped in my 3 this weekend. Then I will start fixing a few things on the 6 that need done

Thanks. I have machines that can clean all that but I try to leave it as stock “190,000 mile” as possible. It gets ran thru the tank to remove oil and grease and anything in the oiling or water jackets. All the gasket surfaces get cleaned and internals but everything else on the outside I keep...

Got my block cut today for the orings and 2 of the orings installed. And that’s about it. Lol. Really hoping to have everything done and ready to install this weekend.

Didn’t get the motor done and installed this weekend like I had planned but got some pics

That being said I haven’t ran the numbers yet to see what actual compression will be with the new cams

Not your kind lol. These engines are supposed to be 9.5:1 I believe. I have not personally seen this on any mzr I’ve taken apart. They come in closer to 9.17-9.23 from my measurements. The engine in the 6 came out to 9.2 after opening the combustion chamber and what I took off the head and...

I’m hoping. Basically the same set up I run on my ms6. Little different head porting and a little more compression on this set up plus the cams. Ms6 made 636 awhp so we will see what happens….

So I had everything to build my ms3 once before and it was stolen by my wife for the ms6 (which I stole back when she bought her 370z). So now I’m building Betty. (2007 MS3). Dropped the block off to have it decked today. Hoping to pick it up Wednesday. Get it assembled and do the engine swap...