Search results

Yeah my bad. That what I meant. You was getting kr at high boost and had to back it down. I was going to just run the ss controller and wot box. After seeing what you’re going thru I’m going to add guardian angel, fuel pressure monitor,tire pressure monitors and lay the Holy Bible on my valve...

If you remember right he said that all was going good in the tune then they started getting KR. And had to back the timing off a good bit. My guess would be a bad batch of gas started the problem. Kr at 30psi and 8000rpm can do some damage pretty quick especially when it was several runs in a...

We ended up going out and looking at the car today. The owner is in a different town so I didn’t get to look inside or pop the hood. The engine is toast so I don’t need to or get to hear it run. There is also 8 inches of snow on the ground so I didn’t get to look under it. The exterior is in...

So did he give you a new rear main seal? I know that was probably to soon. I’m sorry. it wouldn’t have to show up in the logs. If the other 2 cylinders were running rich enough it could still show up on the logs as being fine. Could this also be a result of no wot box?

Damn man. That’s my worst nightmare

I’m kinda excited to get it but at the same time I’m thinking 3 speeds???? Wtf is wrong with me?

So I’m going Wednesday to look at another speed. This one is for my wife. I showed her pictures of it and she really likes it. The car is an 06 black cherry speed 6. So I’m showing her pictures I found online for reference of what she can make it look like. Then I start tellin her what is...

Yes it’s a bolt in. It was recommended to me by a reputable engine builder. But it is recommended to have it balanced. He told me if there was something wrong with my crank to use this as a replacement. There is nothing wrong with the one I took out but I figured everything else is new I’d...

I know it listed the mustang and focus Rs but can’t remember if the edge was on the list or not.

I will be taking more measurements this weekend just for my own curiosity purposes but I’m sending it out Monday to have it balanced because I’m deleting the balancer. If there is anything specific you want me to compare before Monday, let me know and I will get the measurements.

So I was taking some measurements today on my new crank. Started comparing measurements of each journal and decided to weigh them while I was at it. Didn’t have anything super accurate that measures that heavy so I threw them on my house scales. The visual difference is pretty obvious but I...

Is there a dyno near you that you could put it on a load and observe at the same time? If not maybe do a pull and as soon as you smell fuel pull over real quick and inspect before it has time to evaporate. did you happen to go PI and run a return system that might be leaking?

Well I decided to go a different route for my PI set up. Got this bad boy in today. Pretty excited about this.

Perfect

Well nobody ever answered this so I put my trust in corksport and ordered it. I’ll post updates once my build is finished and I get it put in.

Welcome. I came from the diesel truck side too. This is a totally different animal and very addicting. Definitely do the hpfp ASAP. It’s highly unlikely you’ll be able to quit playing with this car once you see it’s potential. Lol good luck to ya

It would be nice to see some speeds

Ordered mine. Tracking says it will be here on the 10th. I really wanted to run a cell for my PI but was hating the idea of having a tank inside the hatch and I didn’t want to relocate the battery so when I seen this it was a must have. Now waiting on the elbow for my TB and I need to order a...

I didn’t use media when I cleaned mine but I think I used a piece of 5/8 or 3/4” hose in the end of a shop vac hose and taped the crap out of it. I used a bunch of different picks and small screw drivers to scrape the stuff off. Then I used a wider screwdriver blade with small pieces of scotch...

Oh yeah. I would fix the oil leak. I can’t speak for Jordan or how that works with fixing it. Luckily (cross my fingers, knock on wood, say a little prayer,) I’ve never been in the situation with the customer being that far away