Search results

  1. Benny71

    Need help guys!

    FWIW. I ordered my slave cylinder from Tasca part # B37F-41-920B and had no fitment issues installing on my 2008 Gen One.
  2. Benny71

    Need help guys!

    If it's leaking on the ground under the front of your car, it's more than likely your slave cylinder. It's a cheap fix and only took about 15 min. to replace.
  3. Benny71

    [SOLVED] DTA Axles and Slide Hammer Tools

    What he said ^^^^^^^^^^^^^^^^^^ I've been running DTA's for a long time with no issues and at $140 for both axles. You can afford to break them if you want LOL...
  4. Benny71

    [SOLVED] Rough idle, stuttering cold start, p0300

    I had a similar issue. Random or specific cylinder misfires for years with no real continuing issue then came the rough cold start like yours. Then a few months ago cylinder 3 misfire became awful to the point of a flashing check engine light while limping it back home. Thought I was in for a...
  5. Benny71

    airbag dash light on

    I just replaced my clock spring as well at 242K on my Gen 1. Its an easy fix, only took about 20 minutes. Here's the link to the easy fix.
  6. Benny71

    How many miles on your MS3

    @Duey1083 - I installed the CST4 at about 235k. The K04 had some shaft play, it was time for a change. Very happy with the Corksport turbo.
  7. Benny71

    How many miles on your MS3

    @Duey1083. They all consume oil, I change my oil every 3-4k miles with Penzoil Full Synthetic 5w-30 and I'm always down a quart or so when I change it. You are correct about "fully bolted". All external bolt on mods. vs. built motor i.e. full after market bottom end, cams, big turbo, like...
  8. Benny71

    How many miles on your MS3

    1) 2008 2) Just turned 242K miles 3) Original motor: I bought the car with 92K miles - Runs like a dream. Little things come up from time to time i.e. Thermostat replacement, Pivot Shaft Seal, Slave cylinder etc. I do all of my own wrenching so keeps costs at a minimum for repairs. 4) Daily...
  9. Benny71

    Just Bought a Speed3, Has a p2006 Code

    https://www.carparts.com/details/Mazda/3/Replacement/Intake_Manifold_Runner_Valve/2008/Mazdaspeed/REPM545401.html?TID=gglpla&origin=pla&utm_source=google&utm_medium=pla&utm_campaign=221983653&gclid=EAIaIQobChMIrNbgm8HA6AIVCmKGCh2iFwXvEAQYASABEgIsFfD_BwE&gclsrc=aw.ds This fixed my problem with...
  10. Benny71

    Thespeedline.com genwin hood strut kit

    Just received a set of these for my Gen One and unfortunately one of the strut seals was blown out when I opened the package, therefore it's useless. The speed line return policy is bullshit, I pay for return shipping because the package is open. How do I know it's defective if I don't open...
Back
Top