Search results

Hey all. I was around back when. I had a 2nd Gen MS3 that made 302 with bolt ons. I sold it to a buddy who went BT and is still enjoying it. I just picked up a built motor BT MS6 from another OG and I'm having Captain KR hook me up with that good drank. I miss the old days but it is good to see...

Ha ha. The PO tried his best to help from many states away. Because he never finished tuning it after the engine build the SS had never been hooked up. After hours and hours of searching and troubleshooting I finally figured it out. Whoever used the add a fuse only used 1 fuse in it AND they...

Yes. If you don't have the correct com port you get a different error. I think I found the problem. Whoever used the add a fuse only used 1 fuse in it AND they had it installed backwards. Terminal leg A on the add a fuse has to be on the +12v side. I added a 2nd fuse and turned it and it...

I recently acquired a built MS6 with PI. The split second controller will not connect to the ECU. I have tried 2 different USB to Serial cables as well as verifying power and ground connections are good. The MAF is putting out .68 volts according to the AP. When I turn the key to on and plug...

I just went through this exact same thing. The previous owner has to go into their account and transfer the license to you from VersaTuner. They will then send the PO a link to forward to you with a new install and activation code for VersaTuner. It will be attached to your VIN and can only be...

Any chance you can re-upload the pictures that are missing. I'm having an issue not being able to connect to the ECU in RS4. I'm thinking it is possible there is a plug that was never plugged in. I have already tried a 2nd usb to serial cable as well. I'm pretty stumped so I'm hoping maybe a...