Search results

The last picture 4 is a stock photo i pulled up. I thought there was a sensor but something in the below picture doesn't match the bottom pic 4. what does the circled tube belong to? I don't think I have a piece to connect to. It should be where the line is in pic 3.

That's a great point, I had completely forgotten about the gauge since I'm normally only under the hood of the Test Speed and not inside the cab. It does have a boost gauge in the interior. I will look to get some pictures of the hose and bolt, but that answers the T and the boost gauge. I...

That is great information. I'm not leaving the snow any time soon, that gives me something more to look in to. I need to jack the car up soon, so I'll get a good idea of how the undercarriage is. Thank you!!

I apologize, I wanted to get you in here, but now that you're here what the heck am I missing? Saturday morning I took to clearing deposits out of the EGR Valve and pipe; good instructions I just wish I had a pressure washer or compressed air to handle it. I may as well of been using a bendy...

I'll have to keep that under consideration. Wisconsin snow could mean I don't get long with the OEM plastic one. I also have a tendency to spray the under body to do my best to rid salt from the frame. I already have some spots in the wheel well.

O I have one now. After the delays with Jim Ellis Maz, I was able to find a new OEM one off eBay. Once I get the install hardware; bolts, screws-- basically everything I "ordered" with Mazda previously, I will install. Hopefully the only major work is just the power steering pump which I'll...

I purchased what was said to be an OEM one online for under $60 (eBay). Found one on Jim Ellis Maz for about the same, but they said it was a pricing error, so it's being cancelled unless I want to pay $200 more for it. Now I just need to re-purchase the hardware to install it, after I replace...

Thanks. I will continue searching to get one. It's been raining crazy here and I rather leave it sitting until I feel it's all back in order. For now.

I just searched and they do. But do you a) have stock in CS or b) my wife trying to increase my out of pocket? No really, just curious if people are still running these to I gather prevent debris or things from getting to their electronics/wiring. I don't have anything under there and I just...

I'm going to be cleaning out and inspecting my EGR valve this weekend, is there a best direction to jack the car up to get as minimal as possible amount of coolant loss. Jack the driver side front only, passenger side only, jack the front end, et cetera. I know it's minor, but it's simply a...

I've been searching for all the under body covering to purchase. With the snow, rain, and such I feel more comfortable purchasing one and installing it. During winter, I have a tendency to wash the under carriage, I also don't want this to cause me issues at that time. Does anyone still have...

Cleared away time this week to review further here, work on the car when the weather permitted and learn more about the AP. Figured out where I went wrong trying to add the different gauges to the AP and now have the gauges there. I wish I had this real time information before I started...

Was the car sitting for an extended period of time? Why was the battery changed? Same brand battery. Did you check to ensure battery is good, despite being brand new.

They do. It mentions it while finishing the re-install. I just turned it on to idle for a bit to review for the light, now it's back after about 10 minutes of idle. I didn't check the code again yet, but I will. It took longer for it to return, so I was actually kind of hopeful.

I planned on requesting a tune, just trying to clear up any and all CEL/MIL before doing so. I figured that would be the smart thing to do otherwise I'd just be coming back for an adjust after all my other ratios were back to spec, please correct me if I have that all backwards. I updated...

I went back in the AP and did new logs. I know it sounds odd not to have done it the first go around, but I reflashed the ECU to include the Cobb Intake. I didn't initially as I mainly installed to get any and all codes. I don't have an active MIL yet but I only had the car on idling for...

The MAF is not OEM, it was purchased this year from Rockauto when the code came up just before winter. I have a used OEM coming in the mail next week. The o2 is not currently OEM, but recently replaced. Ignitors and injectors are both OEM and new. Spark plugs were newly replaced, but uncertain...

It's warm out and finally starting back on this. I currently only have a P2187 code remaining. Car seems to want to hesitate at times right near 5 rpm, almost like the fuel is cutting. Does anything within the logs look familiar. I was able to pull these while the code was actually off. My...

ENGINE/DRIVABILITY Year/Make/Model: 2007 Mazdaspeed 6 GT Mileage: 134,xxx (USDM replacement engine 100,xxx) Location: Wisconsin Cheese Concern: Rough running, hesitation/stutter/stumble DTC's: P2188 / P0138 Modifications: Cobb SF Intake, all else new CS HPFP internals/o-ring, Fidanza flywheel...

Appreciated. I'll order from Rock, I actually needed after the cat for a bank 1 sensor 2 issue.