Search results

Hahaaha talk about patience My car is testing mine lol My traction/skid light is on U0121 code did the cleaning of the steering sensor, fill up the trans case but no Bueno, check if my awd is working and it does even with the light on, Worst part is this My rear main seal is no good This is...

for the fan, when i first started mine, it didnt turn on till i reach 230 made me sh*t bricks, i thought i didnt connect the connectors so i remove the plug and sprayed electrical cleaner then pushed it all the way with a lot of force making the mounting for the module cracks. for the...

what cams did you ended up choosing? i noticed the OTS kelford cams used to only have A and B but dow goes all the way to D

damn howd you got it for 35 I just checked its 50 lol

for the front? LOL if its for the front. i did almost same mistake the lower control arm that goes inside the sub frame was installed and it has to be removed to install the axle for mine, was PITA

sorry i only knew the part number 3600 for the filter since fram and stp is same. but i dont recommend those. although im using the super tech walmart for break in lol. get a pack of the WIX 51516

i thought the ECU will go on clear flood mode when pressing the gas and clutch and it wont open the injectors? LOL now im confuse

did you fill up the T-case before installing? man thats a PITA to fill up if installed in car already. and when priming theres 2 methods I used. Method one: same as above, everything plugged in and gas pedal and clutch on floor while cranking for 10 seconds 5 times Method two: (my preferred...

yeah after reading that 11 pages of thread about this, some said the stop tech (same part number as that rotor above) fits perfectly without machining.

dont forget to purchase this, goes between the bolt and nut. needs 4 for the driveshaft. not sure what size but local autoparts store should have it, that lock washer is needed since stock have those.

CENTRIC 12146064

feels like reading a "how to" instead of the sick build thread, although surprising you didnt go pinned/keyed

When I did this last year there was no write up like this, thank you for the detail work, just to re-remind people, as @JohnnyTightlips said make sure you center the piston so when rotating the cams you wont hit any, when i did this I have the timing plate on, better if you removed the chain...

That’s my spare harness I used to check if my pcm/IDM sends signal to injector Left light is the injector 1 Right light is the injector 4 So I know I’m getting injector pulse I will be using that same harness when I swap my injector, prolly tomorrow

Thanks guys, I made sure it’s intact with the multi meter, I disconnected the injector harness and tested the pins in there to see resistance in the injector while it’s plug in, that’s the only way to test injector without taking the manifold off, I did also applied power to injector 1 with...

thanks enki, im using walmart supertech since im on break in and this is my second oil change thanks for clarifying its normal. as for that i will just pretty much swap most of the fuel stuff behind manifold as the jmf isnt really easy to uninstall and install

Update: rented out the noid light, man Im very CONFUSED noid light light up in cylinder one will be uploading it here did spark check with noid light both coil 1 and inj 1 lights up not same time tho its inj light up then coil light up, does it supposed to light up same time? i check to confirm...

:brokenheart: Im gonna go to votozone after work and rent the noid light, never tried it with mazdaspeed yet but well see. hopefully that 100v dont cause the light to blow up, will be using different harness instead of the harness currently installed not in the mood to remove the jmf manifold...

woah, i was reading the traning manual, lol didnt know it was 700w, but it did say 100v, but man, just sucks

thanks for the input enki, before i send them out ill try and swap the injector with the other injector probably injector1 to 4 (which i shouldved done in first place) and see if 1 still doesnt spray. i live in hawaii theres no fuel injector cleaning here, lol sucks here. Ill have to send it to...