Search results

Hey guys, so I did my pivot shaft seal, and after putting everything back together. It wont really go into first gear for the most part. I have a video so you can see what I am talking about. Of course I would be the only person who works on one part of the car and another part of the car doesnt...

Hey guys, so for the pasy year, I have been getting tooned by Rob, and as we were progressing i noticed that my numbers were very low. So I talked to Rob and he told me that I much have a boost leak somewhere. I did a boost leak test (several of them) and Most of what I found were actually...

Question with anyone who might know. I am currently running ISC coilovers with evo x wheels. I have a set of 17x9 RPF1's +45 offset with 255/40/17 Continental DW's that i will be throwing on. I will need a 15 mm spacer in order to clear the struts in the front. I was curious if anyone who is...

Hey guys, I found a leak and it looks like its coming from the turbo. From the video, anyone ever see it leak from there or know what it might be?

Here are some simple instructions on how to swap out a shift boot. Thanks to @FattiMotorWorks for the shift boot. Tools: Screw driver First remove the shift knob Next, As you can see in the two pictures below, you will want to lift up on the cup holders lid and you will find a lip. Pull up...

Intake Manifold, Fuel Rail, Injector Removal Tools needed: Ratchets Extensions Swivels Pliers Sockets: 8mm, 10mm, 12mm, 14mm T40 Torx bit First off, I have a front mount, which really in not any different than a top mount for this job. So for me, I had to remove my IC piping from the turbo...

Hey guys, I wanted to start this now so that we can make sure to have everything set up well in advance so everyone knows the game plan. Since last year worked out so well I will go ahead and take last year's information and post it below. However I know some people from last year might not go...

Ok guys, here is my attempt at a how to guide, hope it makes sense to you all. Tools: These are the tools that I used but you can use 1/2" if that's available as well. 3/8" drive ratchet 3/8" drive torque wrench 17mm socket 19mm socket Elbow grease Beer Jack and Jack stand Red Loctite 1) First...

What's up guys. Figured I would introduce myself on this new place we call home. Have a 2008 Mazdaspeed3 with some go fast parts. Hopefully I get to meet and hangout with some new people in the Tampa area. Will post up pictures of my ride later on.