Search results

So, something went bang yesterday when I launched on my final run of the day. I chalked it up to things possibly moving around despite the mounts (CS TMM insert, DM PMM, CPE Stg 2 RMM). I completed the run about .5 second off my previous runs so nothing was obviously afoul. It drove the 35 miles...

Stuff Needed: -21mm socket (rear attach bolts) -17mm socket (front attach & RMM bolts) -Torque Wrench that covers at least 75 ft/lbs & 120 ft/lbs -1/2" impact wrench if you have access to one -Large prybar -6x25mm+ bolt/screw w/ plain nut or STD equiv. -wrench to match bolt -ruler -Two 3T...

I've searched here and the other place and run out of luck finding more info on adjusting the subframe to help resolve alignment issues. I found a thread at the other place that Zenit put together but the links to the embedded pics are broken and the verbiage isn't painting a clear picture...

So I finally got fed up of listening to the spoiler rattle while driving and closing the hatch. Here's a walk through on how to remove the spoiler apply foam seals and reinstall for rattle free bliss. Gather the following tools and supplies: pick or thin gasket scraper 10mm deep socket and...

While changing plugs back to NGK's I was shocked to see the tips of the Denso ITV20TT plugs when removed. One had the iridium electrode almost completely gone and a .042" gap. The other three had the electrodes in place but the iridium tip fell off when placed on my toolbox. I haven't checked...

I suck, I have nothing from the events or driving mostly just scenic stuff from exploring around. I was perusing Youtube looking for uploads from the event and found some guy in a 235i trying to chase after a black Pu from Thursday/Friday. Who might the Pu be? Some of the KCK/KCMO NATOR folks...

I'll keep the start of this pretty brief. I have not been overly satisfied with the alignments I've gotten in recent years so I'm starting to read up on stringing my car and starting a list of tooling I'll need. There are a few decent videos on Youtube but I wanted to get some input from the...

Are there additional thread display setting available? Specifically are there options to change the number of posts per page when viewing. Pulled from another forum likely using an older version of VBulletin (version 3.8.6) but you get the idea.

From my how to thread on the other forum... Here's a quick how-to to replace nearly all of the power steering fluid on Gen2 MS3. I have always been surprised that manufacturers create service schedules to deal with major fluids on the car (oil, transmission and coolant) but neglect the smaller...

I can't take credit for pulling the basic part number list together but I did measure a few and make sure our friends at McMaster-Carr had standard Buna-N and Viton versions available. From my post on the other forum.... Links take you to McMaster-Carr HPFP housing ID = 32mm T = 2mm Buna-N...

Curious, is there functionality available in the future to hide sections that one doesn't normally read/participate in? For instance I don't normally frequent the MSM/Miata, MS Protege, CX7 and Ford EB sections.