Search results

pretty skeptical that a stock 2.5 bar MAP sensor would reach 27psi. have you confirmed part number on the map sensor? does KOEO map reading match your actual atmospheric pressure? what is your datalogger?

relevant thread https://mazdaspeeds.org/index.php?threads/your-intake-manifold-and-you.1271/

this has not been my experience, but i have only worked with gopro 4,10, and 11. legit sandisk extreme cards (not from amazon). there's not enough buffer space inside the gopro for it to not write to the card, i don't think it has any significant internal memory onboard. test it first. i've...

absolutely, and they run better because you remove a major source of heat (the battery). but if you run it with no battery, for instance with a cigarette lighter, make sure it is 100% secure, because the slightest power interruption will shut it down. as far as power consumption, i have run a...

I had a lot of trouble with my GoPros before I started taking the battery out and using tripod mode.

that's not a mercedes.

From what I understand, Rockauto works the opposite of Amazon, but they both end up with similar problems. Amazon collects items from sellers, aggregates its inventory causing counterfeit items to be combined with legitimate stock, then distributes. Rockauto is basically a dropshipper who...

Counterfeit parts have been a problem for at least 10 years and it's only getting worse. Almost all parts are made in China now, but a lot are knock-offs without the same manufacturing standards, shipped overseas with fake packaging and documents, then distributed and sold as legit. When...

When replacing the valve cover gasket, dabs of high temp RTV silicone sealant need to be placed on the head where it meets the timing cover, also the cam hump corners, to prevent the type of leak you are describing. These are the spots on the gasket that need help: Shouldn't be enough...

You need to go back and check all your work unfortunately.

take hidef pics in good lighting and feed it into image analysis search, like google images. doesn't look familiar/explainable to me.

26 years of experience in sales and marketing, so he's essentially a professional scam artist.

if I understood your first post, you already dealt with noise on startup before @49k miles, so there's a good chance your valve cover has already been grooved for 60k miles.

couldn't find anyone who swapped an ms6 exhaust onto a 6, which was common with the ms3 to 3, so I assume it doesn't match close enough. you can max out the stock fueling on 2.5" in my experience, so custom would probably suit you best. every "bolt on" mazda catback i've heard is obnoxious...

what an absolute pile you've got there. feelin bad for you, have these

you're dead to me

this one is hilarious. It's the transfercase that overheats and causes AWD to be disabled. so cool the transfercase? well, that doesn't matter, because toyota didn't use any temp sensor on the transfercase, they just have an algorithm that predicts when the transfercase overheats.