Search results

did that bushing ever fix issue? I'm having same exact problem now on my completely stock speed 3 hard to put into 1st or 2nd gear what's that plastic piece even called?

I'm also have -25 fuel trims with no resolve

ya alil over 200 psi all across the board

cylinder 3 failed leaking thru exhaust valve and cyl 4 moderate thru intake valve not so sure that is my issue tho

waiting to borrow a leak down tester to see what's going on I did notice cyl 1 2 and 3 looked wet on top piston. like unburnt fuel piston 4 looked pretty dry not sure if that means anything.

pulled intake off. it's not broken the switch above looks like is getting stuck. only I saw kinda off was the grommet or lock for pcv valve was partially off BUT valve looked like it was in pretty good and never saw smoke from smoke test

getting code p2006 imrc stuck closed (which moves when actuated thru scanner) and p2188 systems too rich at idle

I resmoked it again. all i can see is some smoke coming out of trans (assuming rear main seal) is here a video of it idling. this is the best it has done and another. me revving it to 2k and then idle

o interesting! ya mine smokes alot too which it didn't do before!

sorry just noticed I totally posted wrong kink it's these I bought https://www.ebay.com/itm/OEM-x4-Mazda-Fuel-Injectors-For-Mazda-3-6-CX-7-2006-2013-2-3L-I4-L3K9-13-250A-/324701784549?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

they sent with no paperwork. just says they were reman. it's why I kinda believe it's injectors but what is the chance of all 4 being off. brand new spark plugs came out looking blacker then black literally In a couple of minutes of trying to idle I can't even drive it

https://www.ebay.com/itm/10-12-Mazdaspeed3-Fuel-Injector-Set-Speed-3-MS3-OEM-2010-2012-/302648980323?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 didnt think about the check valve. I can try and smoke it directly thru throttlebody this time as opposed to by air box?

only one I saw was at turbo inlet and I fixed that after smoke testing it

think so? so even if there is a massive leak the trims are pulling -25 fuel?

so I have a gen 1 with about 160k miles. I recently replaced the injectors for a misfire. got a set of injectors reman from eBay (not sure if that's the issue or not) I replaced intake gasket, tb gasket, pcv valve (oem), oil collector gasket and all new injector seals and also cleaned the...