Search results

  1. JimmyFC

    Lean conditions after new injectors

    Planning on doing a boost leak test this weekend. Thats the other odd bit. When I turn the car off, it smells like its running super rich, but after inspecting the engine bay there are no leaks. My best guess so far is that maybe a faulty map sensor? Will be inspecting that as well when I have...
  2. JimmyFC

    Lean conditions after new injectors

    Car ran fine when parked, aside from misfire on second Cylinder. Upon sending injectors out to be serviced, they informed that an injector was 19% low. Replaced injectors with new clean set and now the car starts fine and the misfire is gone. Car will run good for a few second then bogs way...
  3. JimmyFC

    [SOLVED] Cyl 2 Misfire

    Well after an eventful weekend, all is right again. Got a boroscope in and thankfully nothing is damaged. Valves are good as well as the piston head, looks like that grommet got lodged and held in tigh. Took it for a few test drives and no misfire, engine back to normal operating conditions...
  4. JimmyFC

    [SOLVED] Cyl 2 Misfire

    Thanks for all the helpful advice! Definitely gonna go over the car this weekend with a fine tooth comb, see what other goodies i can find.
  5. JimmyFC

    [SOLVED] Cyl 2 Misfire

    Oops my bad haha, uploaded the pics from my MacBook. This was wedged bout halfway in, inspected the chamber there and it looks like it didn’t even make it more than halfway down.
  6. JimmyFC

    [SOLVED] Cyl 2 Misfire

    LTFT's are good, all the logs i took before taking the car apart were all under 4. Though, i just got the intake manifold off and look at the valves from cyl 2 and i think this is my problem... Looks like a bushing of some sort, no f'in clue how this guy got lost and ended up there. Wtf even...
  7. JimmyFC

    [SOLVED] Cyl 2 Misfire

    Thank you kind sir
  8. JimmyFC

    Howdy from CFL!

    You're a legend. Thanks buddy, gonna give it a shot!
  9. JimmyFC

    [SOLVED] Cyl 2 Misfire

    Hey lads, currently chasing a pretty odd misfire on cylinder 2. Just bought this bad Larry a month or so back, and was running fine until one morning went to start it up and got the P0302 misfire on the AP. Misfire doesn't appear immediately upon every start up, but only after a few seconds. *...
  10. JimmyFC

    Howdy from CFL!

    Thanks! Currently ear deep in the engine bay, fighting to get to these injectors and inspect. Cheers!
  11. JimmyFC

    Howdy from CFL!

    Bought my '08 Speed3 last month and i'm in love. Coming from owning rotaries since my first car this has been a fun experience, currently chasing an odd misfire but hope to be tearing up the roads down here in Central Florida agan shortly :)
Back
Top