corksport

Whats up guys! Just wanted to make everyone aware of the deal we have with intake and exhaust manifolds. Both manifolds are currently on sale $50 off. Although if you buy both manifolds at the same time you save an EXTRA $100. Thats a total of $200 off between both units. Intake manifolds...

What up guys! We are running some crazy deals on some scratch and dent parts we have in stock. Some of my personal favorites: 2007-2009 MS3 Small Core FMIC 2007-2009 Mazdaspeed 3 Coolant Tank 2010-2013 CorkSport 'Power Series' Mazdaspeed 3 Cat Back (non resonated) 2010-2013 CorkSport Mazdaspeed...

Preorders are again live on the Rear BBKs Black Blue Red Silver/ with red lettering Titanium Yellow https://corksport.com/rear-big-brake-kit-with-parking-mechanism-for-mazdas.html Mazdaspeed3 Mazdaspeed6 2 piece rotor design with 330mm x 28mm Mechanical parking brake kits utilize a...

Hey MazdaSpeed Club! The Speed3 finally made it back to Sonoma after a long hiatus. The last time I drove the Speed3 here was way back in 2019 with a PB of 1:58. A lot has changed since then, both for the track and for me. Temps were high 60s/ low 70s with mostly clear sky. Ton of high end...

Hey Mazdaspeed Club! Old member (Federighi) under new username after the reboot. I created a few threads in the road race section back in the day. Finally got the chance to bring the Speed3 back out on track. Last DE was in 2019 and I haven't driven Laguna since 2015, so there was a lot to...

Yo, I’m Clyde, I’ve owned my speed3 a total of 6 months and counting, and I have already done way too much to it LOL, I hope we can all be chill w/ each other, I’ll make a mod list one day

Update 3/1/2022: This issue has been resolved. Spill valve was responsible for 60psi drops and PRV was responsible for for fuel pressure never exceeding ~1700psi. Year/Make/Model: 2008 Mazdaspeed3 Mileage: 160K chassis / <1K motor Location: AZ Concern: Fuel pressure drops to in-tank pump...

Hey everyone, I'm looking to get some help on identifying the HPFP internals that I currently have in the car, as the previous owner bought the car with them installed and the previous previous owner said he never had Autotech, only CorkSport. Since I know these are not the latest CorkSport...

After playing the mixing game for too long I decided I would like to try out a fuel cell and just run straight corn in it. I looked at a lot of options and moving the battery or doing a trunk cell but with small kids in the car I did not want fuel in the cabin. So here we go. This is as budget...

What's up everyone! Any tips on installing the CS 3.5in intake? I have the battery and battery box out currently along with the factory air filter. Having issues getting the inlet onto the turbo. There is one thick cable in particular that will not move and I don't want to force anything...

Hey All, I just purchased some parts finally from Corksport. 3.5in intake, CBE, DP, AP V3, Fuel Internals, BOV, Turbo Inlet. My car is a 2011 Speed3, All Stock with 149K miles. I called a shop to tune the car and he is worried about rod stretching/failure and would really reconsider modding...

I am back in the speed 3 game as I picked up a really early 07 a few weeks back. I haven't had a chance to do anything with it yet as I am super busy but here it is! It needs some body work as there is no front bumper cover and the drivers side got hit by some reckless mofo when it was...

I’ve been battling a slowly dying factory under-tray over the years. Autocross, hpde’s, and wintercross had taken its toll on my under-tray. I guess I hit a lot of cones. Mounting points were breaking left and right. Zip ties and Gorilla Glue tape were becoming the norm to hold my tray...

Grabbed a CS 51r battery box recently. Not a bad piece. Yeah, it’s not cheap but I wanted something that would cover both battery and ecu. Previous setup was a jbr tray with ecu velcroed on fuse box. Never was a huge fan of the ecu placement. It was fine for years. Only issue with the jbr...

Wanted to start a thread for anyone intrested in the results. Will be building the engine this weekend or next. 88mm Manley pistons and rods. Mods will be DM ST Intake manifold, BNR s5 Tial 44mm wastegate dumping out the fender on a custom exhaust manifold etc. Tuned by Nishan shooting for...

Yup, we are serving up the meat. Meat Details Here -Derrick

I have good news! You guys are stuck with me again for the foreseeable future, womp womp womp. -Derrick

Corksport told me the other day that they would consider reviving the radiator if there was enough interest, or at least make a couple of units for a group buy. If anyone is interested, post on this thread that you are interested.

Many of you have asked. So we made it happen. Have a good weekend Mazda Family! -Brett @ CS