oil catch can

On to the issues: I've been noticing for the past while that the oil pan shows a mostly-dry stain of oil and the area around the oil filter shows wet stain/dirt. The source of this oil seems to be from the spin-on filter seal, though I am not 100% sure of this. I lubricate the filter o-ring with...

I am burning about 1 qt/1000 mi or more and I'm at a loss at to what to do next. It's definitely coming out of the exhaust, it will smoke during the idle test and the tips get black shortly after cleaning them. There are no leaks, I park in the same spot everyday and never see any drops. I have...

New to the Mazdaspeed 3 Space and as usual with buying cars you think are gonna be awesome their are always flaws. MODS: Cork sport HPFP, HPS CAI, EBAY TURBO INLET, Dual port BOV EBAY, JBR Poly mounts all around, Cork sport OCC. CONDITION: 6,000 miles on long block, 6,000 miles on turbo...

Hello all, I am looking for opinions or facts on which oil catch can setup is best for running a BNR S4 or similar sized aftermarket turbo. I’ll be using a HTP 3.5” intake which does have a port for pcv. I am already running a Damond Motorsports Stage 1 kit with VTA, and planning on getting a...

I did not want to weld my valve cover but needed a vent because the vent on the oil cap just filled my catch can ever 2 weeks with oil. So I bought a fitting and here is how it worked. Buy THIS Remove the Valve Cover - I am sure instructions exist for this but it is pretty straight forward...

Hello all, Long time member, but I've been inactive for the last while. I came into the hobby not knowing anything, still don't know much. With the help of friends (@Awafrican) and this forum, I rescued (a shop rebuilt the engine) a 07 MS3 with blown o rings and a gouge in cylinder 3, and...