rebuild

I have the turbo above on a 2012 speed 3. Blowing smoke at idle from the tail pipe and lots of oil coming down from the turbo oil housing. Looking for a rebuild kit but cant find one. Better to repair or replace?

Hey guys! Hope yall are doing well :) I have been rebuilding my motor for about 5 months now XD taking a wile as I am also trying to get a degree :/ But I had a few questions regarding re-installing the closed block and transmission into the bay. I just re-attached my catback and wanted to...

As I am starting to rebuild my Speed3 I decided I would start a thread to document my progress and collect input from the experts along the way. In December of 22 I spun a rod and parked it for a few months until my garage was prepped and ready to support a build. Over the last two weeks I've...

I've had my Speed 3 for about 4 years now and it has 155k on it. In the last 8 months it has started having engine problems. To my knowledge, it's mostly stock. It has a Cobb cold air intake, and a cat back exhaust. July of 2021 I replaced the K04 cartridge with a re-manned one and did the VVT...

So I bought an 07 that I thought was pretty sound. Then my wheel bearings started going out. Now I'm here... Turns out they welded the axle nuts onto the hub on both rear assemblies. I'm just gonna cut the axles and but new ones. Only question I've got is where can I find good ones? There's an...

I recently rebuilt my HPFP and instead of putting it all in my engine thread I figured I would make a dedicated post. UPDATE: Corksport now sells a kit for this as well. They are pretty much the same thing so whatever you can get, get that one. and their GUIDE This is actually pretty simple...