steering

Was looking for the source of a clunking/popping sounds I have going over bumps, I get the front of my car in the air and check the wheels for play, there is a bit of play when I grab a tire and shake from the sides. However, my tie rods and ball joints all look fine as far as I can tell, and...

Hey guys, there's a very loud clunking noise coming from the front driver side of my 2013 mazdaspeed 3. This happens when turning and going straight and reverse. Here are all of the parts I recently replaced to try and fix the clunking: *sway bar end links *tie rod outter & inner ends *CV axle...

The Issue: Car drives fine until about 80 mph, however at that point the steering wheel begins to vibrate much harder than is normal for my full Damond MM. The vibration heightens in intensity as speed increases, to the point where it is full on shaking in my hands by 90. I don't experience it...

My car "as far as I know" still has OEM inner and outer tie rods. I have had a clunk for a year plus and have never been able to track it down. After doing some research I found that these might be the issue. I figured this would be good for others to know as well. I had never paid much...

Alrighty! That concludes the sign up...we did not reach the 30 name price break, but since this is the first group buy and I have some wicked love for the MS3, I gave the extra 10 dollars off anyway! This means with the code, you can get my traction bar for 109.95 shipped to your door Code is...

From my how to thread on the other forum... Here's a quick how-to to replace nearly all of the power steering fluid on Gen2 MS3. I have always been surprised that manufacturers create service schedules to deal with major fluids on the car (oil, transmission and coolant) but neglect the smaller...