2013 NAV in a 2012 with tech.

[Yatta]

So....
I have wanted the 2013 NAV/OEM look for a while and jumped at a deal on eBay (stupid).
previously I had 2012/tech/NAV with added on iPod integration and Sirius sat.

What I have now;
an installed 2013 touchscreen/NAV unit that works as an HD/AM/FM/CD unit.
Only two cables fit (the main audio and the FM/Sat antenna) leaving the SWC/aux, and two other ports unused (currently).

What works? Bose/Centerpoint/Audiopilot, CD, Radio, Sirius information (but no sound) OLD (upper screen) NAV.
What doesn’t?
Sirius SAT audio,
main screen NAV,
aux in/USB in (so no iPod).
All SWC that relate to Radio.

Knowing some of this was because of changed hardware I have also acquired:
1. Aux/USB for center console (and presumably, iPod integration)
2. TomTom SD/GPS module for center console (with the short cable that attaches to the 3 ports on it).
3. Bluetooth Module for SWC.

I am looking for the remaining harness bits to tie this together ( unused ports on radio, a real pin-out would be a great start but I really need the harness/connectors) and/or a service manual that is current for a 2013 (I have one from MSF, but it is not current to last year model). I am so close to having what I need, cabling is all that is stopping me (I believe).

Thanks!

Yatta.

 

[Raider]

I know a LOT of harness swaps are pretty in depth. you will probably need to ebay a harness. And yeah, only 2010 Service manual histed here. you can try your dealer to see if they can help. They did when I went in.

 

[Yatta]

I know a LOT of harness swaps are pretty in depth. you will probably need to ebay a harness. And yeah, only 2010 Service manual histed here. you can try your dealer to see if they can help. They did when I went in.

I know a LOT of harness swaps are pretty in depth. you will probably need to ebay a harness. And yeah, only 2010 Service manual histed here. you can try your dealer to see if they can help. They did when I went in.

I might have to do that, I think I can make most of the current harness work if I could get a pinout (and bare harness plugs); I will get this to work, it actually has to be easy as it was a reconfigure of the current and for the most part I have seen additional plugs (not modification of the current ones). I want the “OEM” look and feel, if I didn’t I would have gone the Eonen route...

Thanks!

 

[Raider]

Yeah, hope you can get it to work.