Clunk - Front Driver side

Speedhunter

Greenie N00B Member
Greenie Member
Hey guys! I got a weird problem right now on my car. Seem like a loose in the direction ... when I brake the steering go left and right like a warped disk. I check the complete front suspension for a loose ball joint or tie rod or any bushing even the sway bar bushing nothing loose.

When I give a little shot on the gas pedal ... the steering wheel wooble like a mini torque steer.

and I got a noise when I pass over a bump that twist the frame on the front drive side like a clunk but only during this time if the road is straight or bumpy no noise always when the car got twist and the front wheel got compress and release fast I got the clunk

do you think it's a bad transmission mount ?

I got the DM trilogy

a worn bushing on it ???

I got them for 4 years but drove them for maybe 2-3 summer (drive my speed3 only like a summer car

thanks for your help guys
 
Strut mount and or bearing. Or worn endlink.
 
endlink brand new oem last spring. yep ... strut mount is in my list ... last time I got a weird problem like that is was my top plate. Right now I have stock monroe one ... any recommandation for a quality top plate for our car ?

Thanks for help sir
 
I use oem as Monroe I've seen fail. Mount and bearing are needed. 2 parts.
 
I install new inner/outer tie rod and nothing change ... I install new moog tie rod and the boot doesn't feel as good as the oem in the shape of it when install I hope they will last.

So now I will try maybe the front top mount with new bearing.

After maybe the shock (h&r coilover) is dead .... New sway bar bushing
 
Back
Top