I swear I saw someone's build thread where they mounted their 3-port onto the S3 rouhgly in the stock location. Now for the life of me I can't find. Perhaps that person or any can chime me and guide me to that thread.
EBCS Mounted on BNR S3
- Thread starter Chef_boi_r_u_dum
- Start date
http://www.mazdaspeedforums.org/forum/f11/dale-bnrs3v2-install-thread-self-tuning-experience-170946/
I have my 3port attached the same way. No problems so far, nice and stealthy. just don't crush the turbo with the clamp.
I have my 3port attached the same way. No problems so far, nice and stealthy. just don't crush the turbo with the clamp.
I did find that thread a few hours after I posted. Good ole' Dale finding the clever ways.
Since it took me 12 hours to do the turbo I ended up just putting it where I could find space, on the bracket behind the HPFP. It's a bit messy but I'll clean it up later.
Since it took me 12 hours to do the turbo I ended up just putting it where I could find space, on the bracket behind the HPFP. It's a bit messy but I'll clean it up later.