Jtotheonah
Greenie N00B Member
I mistakenly purchased a gen 1 CPE Intercooler and now have a shroud that does not seal at all. Unfortunately, I was left with a seller who would not accept a return... I was wondering if anyone can help me with some information on the genpu shroud so I can have one machined for me. For the brackets that sit on either side of the intercooler, I just need to know what the distance is from each hole to the top of the intercooler (I will be using longer bolts and spacers to account for the height difference). Lastly, I noticed that the shroud changes angles in two places, so I just need to know how many degrees that angle is and wheres those angle changed are located. Please let me know 
I will provide a picture of the shroud angles I am referring to.
I will provide a picture of the shroud angles I am referring to.