Latest activity
-
KJMS3 replied to the thread Misfire Under Heavy Load Only.@Crazycanadian i have my catch can/PCV routed exactly like the CS instructions found here. As for the miss, I did have some mods to the... -
Enki replied to the thread Misfire Under Heavy Load Only.His PCV system is set to vent to intake (pre-turbo) so the port on the intake manifold is capped. This means any crankcase gasses would... -
Crazycanadian replied to the thread Misfire Under Heavy Load Only.After reading all of this... I am lost, not because I don't understand the problem. But the testing and PCV checks.. A PCV system is...
-
It depends on how much is coming out of the hose and going into the intake. If it's like this, you're basically fucked: -
Enki replied to the thread Misfire Under Heavy Load Only.It depends on how much is coming out of the hose and going into the intake. If it's like this, you're basically fucked:
-
KJMS3 replied to the thread Misfire Under Heavy Load Only.Yes, it all vents to the intake which is why I thought the pressure vibration was normal. So is it possible I’m lucky enough to not have...
-
Enki replied to the thread Misfire Under Heavy Load Only.So you're vent to intake then? That would mean you have crankcase pressure at idle, which isn't exactly great. Also, the hole for...
-
Theslow6 reacted to Matt@DamondMotorsports's post in the thread HOW-TO: replace MS6 transfer case with
Like.
How to replace MS6 transfer case To begin, this how-to shows how to replace the transfer case, without removing the subframe, just... -
Oh it definitely won’t, I love speed3s and I’d love to take the time to use this as an opportunity to build the motor and do something... -
KJMS3 replied to the thread Misfire Under Heavy Load Only.Even with the other side of the PCV system blocked off? The barb on the intake manifold is blocked off (as per CS catch can install...
-
Correct. You should feel suction at idle going into the valve cover barb, not pulsations.
-
Don't let this deter you from speeds. Just maybe don't use Drama/graveyard. Sorry for the (probable) loss.
-
Enki replied to the thread Misfire Under Heavy Load Only.Correct. You should feel suction at idle going into the valve cover barb, not pulsations.
-
KJMS3 replied to the thread Misfire Under Heavy Load Only.Maybe I got the wrong hose then bc you’re saying it’s on the intake after throttle body which could only be the manifold. The one I...
-
Enki replied to the thread Misfire Under Heavy Load Only.Well considering the vacuum hose goes from the intake (after the throttle body, thus, making a LARGE amount of vacuum against that hose)...