Latest activity
-
Phoenix replied to the thread Replace Rear Main Seal?.I got the seal on there without damaging the seal lip or anything as far as I can tell but the back part of the seal protrudes past the... -
john21 replied to the thread KW v3 spring swap.Ok, so I will put a list together. I pm'd Mauro to ask if he would be open to a phone conversation, as I had a handful of scenarios to...
-
gotovato replied to the thread Building for the road course...again.Engine has been picked up from the machine shop. Assembly began yesterday on the short block and ill finish it this weekend. Pending a... -
Easter Bunny replied to the thread Diag Help.Translate the codes -
Crazycanadian replied to the thread Diag Help.P0113, P0102, P0103.. These codes suggest either an air leak causing the MAF to read wrong, MAF sensor problem it's self, Wiring or ECU...
-
Easter Bunny replied to the thread KW v3 spring swap.No pm discuss publicly.
-
john21 replied to the thread KW v3 spring swap.@Mauro_Penguin GC is recommending 550lbs for the rear. Most research I have done are recommending a higher spring rate in the rear...
-
Hi John Its nice to know that GC still supports our platform. I am running e30 or e36 rear spring perches. Yes, Im familiar with the...
-
Is there a way to get ahold of you? My apologies, as I couldn't find a way to direct message you. I saw an old post on KW V3's and... -
Mauro_Penguin replied to the thread KW v3 spring swap.Hi John Its nice to know that GC still supports our platform. I am running e30 or e36 rear spring perches. Yes, Im familiar with the...
-
Mazdasweed34 replied to the thread Random Engine Power Loss.I could try but it is so random when it happens. The only constant is that it is hot out. I forgot to mention that the coolant temps are... -
Easter Bunny replied to the thread Random Engine Power Loss.Can you post a lot of it happening
-
v Year/Make/Model: 2007 Mazdaspeed 6 Mileage: 150300 Location: Colorado Concern: My Mazdaspeed6 will randomly stall while driving, but...
-
flint723 replied to the thread Throttle body limited to 40%.Idk if it was mentioned in the other thread, but in the accessport you can log throttle pedal position in addition to tps position...
