Latest activity

  • Enki
    Enki replied to the thread Signs of excessive backpressure?.
    Depends on the car. Also, this will change your position on the chart. Don't worry about the battery voltage; the ECU will adjust it as...
  • Oh wow, I have never gone near 14 degrees at 6k. I know it may vary, but do you have a rough idea of what sort of timing on 98 octane...
  • Enki
    Enki replied to the thread Signs of excessive backpressure?.
    Power is probably falling off because you have no timing. At ~6k, most tuners have pump gas at or near 14 degrees, and det-free corn...
  • poe0
    poe0 replied to the thread CST4 Exhaust.
    K04 died. My understanding is that power goal is on the upperend of what the K04 can handle. Buddy gave me his CST4, high flow TMIC, and...
  • I have checked cam and crank timing, all are together at TDC so unsure on that one. I have had a time where I have accidently ran up to...
  • Easter Bunny
    Easter Bunny reacted to Enki's post in the thread Signs of excessive backpressure? with Like Like.
    I think you have a cam or crank timing issue, as you should be able to push it much further before misfires. On stock map timing, I've...
  • JohnnyTightlips
    If you have a 3d printer you could design and print and test fitment without having to pay tons of money for a final part until you are...
  • Raider
    Raider replied to the thread Wheel and Tire Fitment Database.
    OP updated with a replacement for wheeldude guide that is DOA. https://tirereference.com/calculators/tire-comparison-calculator/
  • Enki
    Enki replied to the thread Signs of excessive backpressure?.
    I think you have a cam or crank timing issue, as you should be able to push it much further before misfires. On stock map timing, I've...
  • I'm still on pump gas, only around 8 degrees above 6500RPM so using that graph you sent, I should be good up until around 102% which...
  • JT020110
    I saw somebody on instagram use focus RS brembo's and it seemed like less work than this solution. Is there a major performance gain for...
  • JT020110
    So yeah my original hope around fixing this went down this road. I had everything pulled apart to take some initial measurements and it...
  • Enki
    Enki replied to the thread CST4 Exhaust.
    Stay stock as long as possible.
  • brandonf
    I'm using the evo 8 brembo's on my speed6, but I don't remember having to modify the rotors at all.. just bored out the knuckle slightly...
  • Easter Bunny
    Easter Bunny replied to the thread CST4 Exhaust.
    why are you upgrading the turbo for that power goal? you can get there on the stock turbo
Back
Top