Timing Cover Install and Timing Pulley NOTE: The Timing Wheel is pressed onto the crank pulley. If you plan to make some decent power and bounce...
Installing Timing Components Pro Tips Pretty much every bolt tq sequence is a criss cross or start in the middle and circle out. When in doubt...
Timing the Motor - it's not that bad Here is the quick and dirty of timing this motor. Take Cams Out Set Cyl 1 to TDC and use TDC Pin "double...
Pistons going in. I got the pistons installed the night after I did the filing and here is how I did it. I had the machine shop connect the...
Cranking it - Fun times with my Crank @alexwlwsn I got some time last night to get the crank installed. This was not very difficult but you need...
Separate names with a comma.