Joe_Hobbes

Yea I sprayed that whole area really good with soapy water when I took the intercooler off and tested the through the throttle body. I...

Yes definitely appreciate everyone’s help on here!! I am very mechanically inclined but all the help and suggestions have been great...

Agreed on the compressor and that there still may be a leak. Tonight, I am going to try and bench test the BPV by connecting a syringe...

Yes, I agree I need to do a compression test on it this weekend. It does not have any DTC and it drives really well, idles fine and...

Yes sorry I forgot about that, I did replace the spark plugs when I bought it. That would make sense that the injector seals are leaking...

Alright Im really lost now. I bought some pvc plugs and did more testing tonight. The intercooler is not leaking. I blocked one side and...

I was worried about putting too much pressure in the motor and blowing out seals going that high, but I will try it, if it's safe. The...

If that is the leak on mine wouldn't the car run really rough? I am seeing -21psi vacuum on my gauge, which I've read is normal. The car...

I soaked down everywhere I could lol. I tried to spray under the top mount in that intake manifold area but it’s tough with the top...

I used a glow shift gauge I installed last week. It was showing about 10-11 psi Max. The versatuner log showed 11.2 I believe.

Year/Make/Model: 2006 Mazda speed 6 Mileage: 106k Location:NC Concern: Hey guys I’m new here. I just got a ms6 a few months ago and I...