Recent content by marcabishop

So glad I just found this thread. I was about to put a full replacement bucket into my gen 2 from a junkyard mz3, but I see I'll run into the same issue again I'll try the soldering method as well. I'm very curious to see what my current bucket looks like. Will post pix as soon as I can.

This would not be an issue with a DTP supplied downpipe. My DP was a custom fab one with the "JDM Sport" ex Mani, where the ewg was angled straight down. I'd recommend a DTP DP with purchase of a DTP ex Mani for future buyers! That way it'll save you the headache I am going through lol... I'm...

Bolts appear to be M8 x 1.25 or 1.0 (not sure yet) with the following lengths: 75mm, 80mm, 85mm, 110mm. Will confirm soon!

I've got all parts ordered, was just a little over $320 for everything, that's the lowest I could find everything for. I'm awaiting all parts to be delivered before I post any model #'s of parts so that others do not start the same project and end up with incorrect parts. I've also ordered an...

Yes correct, serpentine belt will be determined upon everything bolted up. No idea what size will be required at the moment. I will continue to update the OP with part assumptions.

I need to verify if the AC lines will bolt up to the same location on the Ms3 condenser, if they do then the condenser is fine to use and the lines are all I'll need. I've also updated OP with the part you mentioned.. forgot to list the compressor. It appears to be more of a brick shape than...

With my previous JDM Sport log exhaust manifold, my EWG was mounted vertically and cleared my custom 3” vband downpipe. With my most recent purchase of a DTP Fab log exhaust manifold, my EWG now sits at a 45° angle, which is now in the path of my downpipe. As many of you know, running a log...

Don't worry buddy, now that I know how easy this website is, I'm gonna start kicking some a$$ in MN. I know we were lacking in MsF due to mobile use, but there's no excuse now!

I need to recreate business cards (or group cards) for a local group we have here in MN called Underrated (sister group of Nator MN). When I finish the design, I can post it here and make any necessary modifications that you'd like to see. Please let me know all of the information you'd like to...

@Nick Lasserud this is what you need for your fitment issues in the rear!