Recent content by mikael

Hey curious whats your instagram?? I got a few questions about installing the quick latch. If you want hit me up justanotherspeed on insta. Thanks!

hey what brand crash bar did you get?? im looking to get an aftermarket one but only treadstone is all i found

alright thanks

yea which he didnt. curious as to how to adjust your wastegate. i tried turning it but the nut wont break loose. also do i remove the nut close to the flap or the wastegate?

i just had another tuner tune my car and now i gotta adjust my preload

yea like i said the shop checked everything if its loose... and its not

oh okay well the shop checked the if arm was loose. i havent touch the wastgate arm anyways. i didnt loosen it or anything as i thought the tuner would atleast tell me

yea the shop checked it and it wasnt loose. they did a test and remove the cap and it build 22.5 so im almost certain i just need more wgdc

yea so the shop i brought my car couldnt find anything either so they tested it and removed the cap on the bottom of the wastegate and it ran 22.51 psi

LTFT at idle is -7.59 or -5.4 something liek that. i'll make new logs when i get my car back from the shop so the shop i brought it took out the cap on the wastegate and it peak up at 22.51 psi on boost so im almost sure its the tune itself and wgdc needs to be brought up more

I did the boost leak test and soapy water everywhere to check. im going to change the vvt solenoid gasket but that wont affect boost. Also im running a cst4 turbo

it drops very slightly actually. we think its just leaking from the vvt gasket.

Hi so im pretty new to the forums so im just wondering as to what else i can check and such about boost leak. I have a 2007 mazdaspeed 6 tuned by drama. Before i installed my 3.5 inch intake and corksport fmic i was running 24psi but after install erik from drama said that he upped my wastegate...

they dont turn on when i pull or push. like its not getting a ground or something. idk if its wiring issue because it used to work before. i thought it was just bulbs

Hey guys im new here. Im just wondering so i changed my high beam bulbs on my speed 6 but it didnt do anything. checked the fuses and relay evem switched relays just to rule it out. Its still notcworking. Both high beams are not turning on and its also not flickering. Im trying to figure out...