Recent content by Ms3orDie

So when i purchased the occ from damond, the hose already had the check valve pre-installed. I didnt bother to check it.

Stupid question but, i tried doing a boost leak test on the intake side and air is escaping from my vta cc. Could this be causing the leak? I have a brand new pcv valve and the check valve that damond supplied.

No

Really what?

20

Ok. So then my issue lies elsewhere.

No

Wouldnt a bad evap system throw a code? Edit: i get what you mean now. Ill need to do a drive cycle to get systems ready. But damn i put at least over 100 miles on it since the recent work

Im trying to chase a potential boost leak and I think ive exhausted all my options here. Boost leak tested and found nothing. Tuned for 25 psi but im only getting 14-16 at wot. Rarely i get 19-20 but only during certain conditions. My ltft is at -9.52 and stft is at -3.28 at idle. At wot, they...

Thanks!

unfortunately im not having any luck.

I will try this. Thanks!

So crank it all the down to soft? I have it in the middle right now.

I am running a turbosmart bov. Ive noticed if i move the nozzle for soft/hard it affects the boggling that i mentioned.

Yes its a stock block. Might be a dumb question but would i need a retune for deleting the egr?