Search results

Aug Mosport weekend is in my calendar now. My son & I might come be spectator for a bit. ;)

I dont think your 1-2 issues will be rectified by replacing the mount, these cars are cable shifted.

Lift the trans lightly with a jack and a piece of wood, just enough to see the play in that transmission mount. Its bad. If that mount is bad also check the dogbone shaped mount at the back of the engine from underneath.

Although Im not a good log reader, I tried looking at the logs in the OP. I see your LTFT runs between 0 & -10. Although that isnt optimal and should be tightened up, its not grossly out of whack. Its bad, but not that bad. Have you spoken to your tuner? Your STFT do fluctuate a lot under...

What are you running for a BPV? Can you swap it out for another? It is normal for the AFR to richen when the brakes are applied, the booster is putting an air load on the engine which is post MAF. Something else is the issue making it hard for the computer to maintain proper AFR.

Are you still going lean with brake application, still having the same issues? Or do you mean that nothing changes when the brakes are applied?

Looks great! Keep it up and the work will pay off long term. I have posted some threads in the 3/6 Detailing section if you are interested. I hope to get back at it once my new garage is completed.

Dont change things until you know that is the source of the problem. You need to plug the intake port and see if the situation improves. As for right now its just a hunch. If the problems are because of the power brakes system, plugging the intake port will answer that question. Then you...

Sweet :hambre:. Thank you, info is always good!

I dont have a picture of the valve, its built into the hose. I would block @ the intake manifold first. If you symptoms improve, the hose, check valve or booster are the issue. If no change, hose/check valve/booster are not your issue.

My opinion is OEM axles are commonly better quality than A/M brands. Ive dealt with too many fitment issues and engineering differences to trust them, especially when low priced. However I have found a shop through a friend at my local NAPA that makes custom shafts. They will weld on new...

Yes, plug the connection point at the engine and see if your issues improve. Edit: GP9A43490A is the part number for the hose with built in check valve, which is regrettably discontinued by Mazda.

Get yourself a boot clamp tool. Index mark your shaft before you remove it from the diff so you can orientate it during install. CVs are easy to disassemble, just make sure you take it apart and put everything back together exactly...exactly the way it came apart. Parts have to face the same...

The round rubber piece I think is the upper bushing from the OEM passenger motor mount.

:thumbsup:Thank you for the write up about the 2.3/2.5 chain dress. You have me thinking about my future endeavors.

I think hes referring to the cam buckets. If so, they 100% need to be in the right spot to make the build much easier. However, it can be made right it just takes some work. <<Here>> is JTs write up on the process of installing them if you need help understanding. Good Luck

Thanks for you take and pix on the PTO. There have been a couple writeups about the PTO, but it has been a while since someone has visited the topic. I guess its a Speed6 thing, lol.

^--x2 My Damond catch can cured the buildup of oil that would regularly dribble out of my intercooler if I left it propped up on the bench. I dont get much if anything anymore. OP, you have covered most of what this car can catch you up on. I too had some rear antenna and door wiring pin...

Looks like a restoration project to me...restoration from general public use, lol. Car looks good for almost 20 years too, lucky BC car! How many K? edit: Welcome by the way, I always like to see another 6 around!

Consider getting your injectors cleaned if they are due and reinstalled with some good seals. Hard to say, "Years ago" is a pretty big spread. If the problem is resolved, then you need to decide if its worth digging into or just a coincidence. As with anything electrical start with the...