Search results

  1. New k04 problems

    I can move it with my finger. Not saying it is actually working. And I guess I can say it's not being that indont hear is blowing off. If it does its not much. Lol

  2. New k04 problems

    So you think my problem is my hks bov isn't working ?

  3. New k04 problems

    I'm gonna make a piece to do leak test this weekend. I've gone over the whole system and can't find a leak by examining couplings or anything . The bov was fine when I removed the old turbo. I can depress it with my finger and it returns back.

  4. BPV Boost Leak??

    Did it flutter bad and buck at wot?

  5. New k04 problems

    Maybe I also should note that this is all happening during the shift. Not during the pull. Only when I let off the accelerator to shift.

  6. New k04 problems

    I found a couple pictures where someone else was asking for assistance and posted pictures of his set up. Looks like the wastegste us on the nipple closest to the front of the car or plug. That's how mine is now and was before. Now only 15psi amd compressor surge

  7. New k04 problems

    I've looked and looked and can't find anything. Everything is about aftermarket 3 port stuff. Lol

  8. New k04 problems

    I adjusted it way back out and swapped those 2 lines on the ebcs. It made 8lbs and sounded very very quiet. My line going to the wastegate is farthest from the connector on the ecbs.

  9. New k04 problems

    Wastegate closest to the plug?

  10. New k04 problems

    I did break the old ecbs. I bought a new 1 from oreillys and installed it. I bought the turbo from factory turbocharger. If I have the 2 lines on the ecbs backwards would that cause issue?

  11. New k04 problems

    So I replaced a k04 with a k04 and I'm going to have to get it tuned again Yes. When I out this new turbo/ wastegate on my car it only made 12psi on my e85 tune. So I adjusted the wasegate to achieve my previous 21ish psi at wot. Now the wastegate is so tight I get compressor surge. So I need...

  12. New k04 problems

    So how could I get the 20 psi then?

  13. New k04 problems

    Ok I've been chasing this for 2 weeks. I installed a new k04, and had to adjust tye wastegate because I was only getting g 12psi of boost. I've adjusted it to 20.65 psi and now I'm getting alot of compressor surge. I can't find a leak of any sort. I'm going to pressure test it this weekend ...
View older results
Back
Top