Search results

Just my luck. Oriellys swapped me my ebcs for another new 1. That's Def not the issue. Still only building between 11 and 13psi

Idk whatbit is. It's whatever was on it when I bought it. The ebcs on it I bought when I swapped turbos because I broke a nipple off the old one. So it seems to be plumbed correct. So the ebcs is likely the culprit. Couldn't run a manual boost controller of would the computer throw a fit if it's...

Hard to tell in the pictures. The line coming glfrom the top. Or small port on the wastegate goes to the ecbs nipple closest to the solenoid. The other nipple on the ecbs goes to my intake pipe. The line on the bottom on the wastegate, or the bigger port on wastegste goes back to the turbo its...

Apologies good sir. I missed where he asked for a log. If I can figure out how to post 1 I will do so. Thank you

Well, that seems productive and helpful. Time we'll spent. Horrible drawing.. but time we'll spent.

I'm unsure of what this means?

Still no luck. The tiny leaks I found have been delt with. Talking with the turbo manufacturer they believe my cat is clogged "will check this weekend" doubtful. I now believe either the wastegate is stuck open but I'd think then if have zero boost. Correct me if I'm wrong. Or my new ebcs is...

I was thinking maybe it's not closing

True.

I searched. Some said you will only get 15psi before it bleeds past the throttle body that's why I asked. Would a couple tiny leaks they has been addressed. 13psi it builds. I think I hear air from around the turbo somewhere but can't see any bubbles or anything. Mayne is going through the...

Do I need to block off the throttle body end? Or just the intake to valve cover line?

I tried that today. Pulled a valve stem into. Pvc cap. Put that where the filter should go. Pumped air into it and didn't hear any leaks amywhere.tried soapy water. Nothing. Should I block off the throttle body side also? I could release the air with the bov but if I turned the pump off there...

Im looking at the same pictures I've been looking at for a week. I see the line going from the bottom of the wategste to the compressor housing. And it looks like the one from the top of the wastegate going to the ebcs port closest to the connector. I can't find a picture but assume the Second...

Didnyou have to get a new tune?

Ok so another possibility dealt with. Oem wastegate is now on the new turbo. 12.91psi is what it makes wot. Ebcs clicks when given power. One thing I'm not sure of is the lines going to the ebcs. I can only find 1 pic and idk if that's correct. Wategate to port A which is closest to the the...

I did a leak test. It dosnt hold air but I can't find where any is leaking. through the throttle body I guess. The ebcs I got isn't the same part number is a Dorman 667-104. Maybe it's not the same? Ebcs does click when given 12v and part numbers seem to cross match

Not.much room to do all that with it on the car. Lol its a new ebcs I'll check that too.

True. Only thing there is I didn't change any of that. I guess I'll do a leak test. If I don't find anything there, I'll get a new bov. And if that's not it I guess this new turbos wastegate isn't capable of handling more that 12psi. Lol