Search results

  1. Worbit

    Rough idle at cold start

    The VTCS was checked out and everything looked good. Installed the CS injector seals and it still does this stutter on cold starts. Once the car is warm, its a champ. I'm also getting KR around 5700rpms now :(
  2. Worbit

    Rough idle at cold start

    So wouldn't the injector seals cause an issue even after the engine is warmed up? Sorry if that's a noob question, I've never dived this deep into engine mods before so this is all new to me and I've read so many threads between here and MSF that my head could spin. I went ahead and ordered...
  3. Worbit

    Rough idle at cold start

    Ok MSO, I need your help. I had my engine replaced about two months ago and ever since then I have had a really rough idle during a cold start, so rough that the engine almost feels like it's going to stall. Once the engine is warm though it evens out and drives fine. I've upgraded/gapped the...
  4. Worbit

    So I'm slowly building a CS MS3 >:)

    It's going to be too difficult to land a job without a degree in Japan (teaching wise) so I'm finishing up school and then will make my way over there.
  5. Worbit

    So I'm slowly building a CS MS3 >:)

    I just wanted to say thank you to Luke for helping me out today with my CS Turbo order. My motor shat the bed about two weeks ago and after locating a replacement engine I figured I would add a few more CS parts to the mix. :) You guys originally build this thing for the previous owner and I...
  6. Worbit

    Corksport FMIC for Gen2 2013 MS3

    I have the CS FMIC with the CS SRI and it clears just fine. Based on your JBR filter size, I think it might be close but it should clear with a little room left over
  7. Worbit

    Threw P0302 with rough idle

    Comp test shows major failure in cylinder #2 :( Looks like its time to either rebuild it myself or find a shop that will do it.
  8. Worbit

    Threw P0302 with rough idle

    Plugs were swapped and the problem continues. Plug from Cylinder #2 was also caked in oil. I'm currently trying to track down a compression test kit and go from there.
  9. Worbit

    Threw P0302 with rough idle

    So my car is throwing a code of P0302, misfire on cylinder 2 and has a rough idle under low RPMs. Smoke is coming from both exhaust tips and when the plugs were pulled, plug #2 was caked in oil. replaced the plugs, still having the code/rough idle. After doing some searching it seems like it...
  10. Worbit

    Help me figure out this cable head.

    annnnnnnd I'm happ to report I just managed to track it down.
  11. Worbit

    Help me figure out this cable head.

    Hey guys, can someone help me identify this molex cable? I've been to both Fry's in San Diego and they didnt have this piece. It's currently got a short in it that causes the front driver's side door speaker to be non-responsive. It's a power issue that is stemming from this damn connector. The...
  12. Worbit

    Hey fuckers!

    Good news, its been about a week and no smoke from the ko4. :) Also, I am finally a
  13. Worbit

    Hey fuckers!

    Upgrade happening later tonight when I get home. Thanks for the warm welcome guys
  14. Worbit

    Hey fuckers!

    yeah, I'm over here too now. I need a turbo replacement. If you have a FS thread up please post that shit in here so I see it. @Raider - I want my post count from MSF brought over. I earned that shit!
  15. Worbit

    Add 5 BHP with Mazdaspeeds.org Decals! In Stock, ready to ship!

    Hey Raider, I just sent payment for one shirt in 2XL and one silver sticker. :)
Back
Top