Search results

He's sending me just the level sensor. Hopefully, this puts this issue to bed for good. Crossing my fingers. Oddly enough, it doesn't appear any different than all of the level sensor boards I have experimented with so far.

L34B-13-35ZA is what I ordered from tasca. The other 2 look completely different than the photo Enki showed me of his gen 1 basket. So I went with that PN. I'm talking to a dude right now who has 2 extra baskets from a gen 1. He's willing to pull off the level sensor and ship it to me. For...

Yeah and the level sender itself is discontinued. So gen 1 owners will have a hard time finding a replacement

And I'm dead. Ordered a brand new OEM fuel pump basket for an 09 gen 1. Opened the box and found the fuel level sensor/sender wasn't included. Guess I'll have to return this and find a used basket assembly lol

At this point a modified gen 1 basket is cheaper than going fuel cell to correct a miniscule problem. The journey continues. I'll see if i can find a used gen 1 basket somewhere.

Do you have an oil pressure gauge? If not, these cars need them. Specifically with a built motor Sent from tapioca

So far so good. A few WOT pulls near 37psi and plenty of varying driving conditions. Crossing my fingers Sent from tapioca

Enki practically saved my life suggesting the honeycomb for my 4" intake. STFT would peg and hold at +25 when the fans kicked on. Now the ecu properly adjusts and STFT comes back down. The car doesn't drive like absolute dog shit now with the AC on! Thanks @Enki Sent from tapioca

I got a 12" 6 way TB extension from Ballenger Motorsports. I will swap out the current harness if I experience issues again. I'm getting mixed signals about the necessity of the spacer. Tuna says not needed on ST manifold, Damond says it is, CS says its fine without it. So i'm just going to fck...

I'll have to dig up the spacer somewhere in the garage and try again

Not long. If I can find the spacer lol Damond says the spacer is required to prevent possible throttle plate bending. I don't see that happening unless at WOT the plate touches the manifold inlet. As of now I assume the large o ring on the throttle body is sealing against the manifold or else i...

Quick little update to my build's unsolved mysteries. After reviewing logs and noticing irregular TPS readings, I swapped out the OEM throttle body for the same CS TB that previously gave me idle surging issues. This completely fixed the rough idle, surging, and most importantly stalling. So...

Noticed KOEO throttle position is locked at 5 with varying pedal pressure. TPS shit the bed? Throttle body reset "procedure" did nothing lol Sent from tapioca

I have been reading that most throttle by wire controlled bodies usually need some sort of relearn procedure. Seems pretty simple and silly to be honest. Drain capacitors in ecm (disconnect battery) Reconnect. KOEO and immediately full pedal pressure 3 times. Bring it up to full temp and...

I took the liberty to open up a CS throttle body and make sure everything inside was functioning properly, before reinstalling it again. Definitely voided any warranty, but meh. It's a pretty simple design utilizing plastic gears. Everything appeared brand new, as it should. No teeth missing or...

Man, plagued by throttle body problems. Yeah, I still have 2 CS throttle bodies. I'll throw one on and see if things get better or worse. I assume my tuner recently made the adjustment from CS to stock. But I can load the previous rev if need be. I sent both logs to my tuner as well. Sent from...

Thanks for that breakdown Enk. The car is pretty much undrivable at this point. The at temp log has captured data of it actually stalling I thought. I'm running the stock throttle body Sent from tapioca

Didn't even have to leave the driveway. It's that bad now. I took a log at cold startup because it was struggling already and another at temp. I only backed out and pulled forward for it to stall. I went ahead and sprayed carb cleaner all over the bay, but found no change in idle.

It's set right at 40psi pre vacuum. Where tuna wanted it set Sent from tapioca

When it settles it appears to be 1000-1050 Sent from tapioca