Search results

  1. Easter Bunny

    Gen2 MS3 - Louder engine braking growl at 2600-3000 RPM + shutdown noise

    I would start by checking engine mounts. With the hood open have someone try to move the car with the parking brake engaged. If the motor moves its a mount
  2. Easter Bunny

    PCV plate and catch can issues

    15-20 on the leaks down isn't great
  3. Easter Bunny

    LS RX8 Build - Project Doritno

    what weight oil were you running? the heat could have thinned it out and caused the low oil pressure vs an issue with starvation
  4. Easter Bunny

    How-to Rebuild Your Rear Brake Caliper Internals and Seals

    just make sure that you host all the images on this website so they stay up forever
  5. Easter Bunny

    PCV plate and catch can issues

    Time for a compression test and leak down test
  6. Easter Bunny

    MDB's Ultimate Money Pit

    damn everything looks so ...... clean
  7. Easter Bunny

    Building for the road course...again

    i thought you were trailering now?
  8. Easter Bunny

    Building for the road course...again

    how in the hell are you in the same class as a Golf R? the empty license plate frame on the front is killing me though. it makes it look like you pulled into the wrong parking lot went full send and ended up 2nd.
  9. Easter Bunny

    KW v3 spring swap

    For a second I thought we were posting penis specs
  10. Easter Bunny

    2nd gear popout options and parts

    Jbr used to have the best video for adjusting shift cables don't know if its still there
  11. Easter Bunny

    Oil preference

    Bro there isn't anything wrong with that motor that a fresh set of plugs an oil change and a few hours of running wouldn't fix
  12. Easter Bunny

    2nd gear popout options and parts

    there are no upgrades the transmissions are as bullet proof as you could hope for. You have one of the following issues. 1 running a heavy ass shift knob 2 shifter cables need to be adjusted for proper engagement 3 a shift pad fell off a shift fork. Usually due to resting your hand on the...
  13. Easter Bunny

    Oil preference

    Dude building a motor because there is sometimes some water in your catch can is certainly a choice
  14. Easter Bunny

    Diag Help

    Translate the codes
  15. Easter Bunny

    KW v3 spring swap

    No pm discuss publicly.
  16. Easter Bunny

    Random Engine Power Loss

    Can you post a lot of it happening
  17. Easter Bunny

    KW v3 spring swap

    Post away man the 3rd gen section is welcoming to all the slow versions since there was no speed version
  18. Easter Bunny

    Building for the road course...again

    Was first place the cheating frs
  19. Easter Bunny

    Leaking through Crank Pulley alignment bolt hole

    or even more backyard, cut the head off a bolt of the right thread and cut a slot to install it flush with a flathead screwdriver then send that bitch home with a bunch of thread sealer just dont use something like red locktite you will never get that back out with a flathead you need blue at most
  20. Easter Bunny

    What did you do to your ride today

    Not today but over the weekend drive it 360 miles round trip to the beach. Pretty happy it went smoothly since the car has only moved about 400 miles in the past three years
Back
Top