Search results

ok so i tried using data logger on mazda IDS and found no power on injector pw1 . does that mean my ecm is fried?

i did mention other threads (i meant that one specifically ) it states two grounds on top of transmission . where ?! i only have one . i need more people to confirm

i have looked at manual but have not found locations points . i have ecu pinouts but i want harness ground locations and see if im missing one because as i go to search forums i found another thread saying there is two ground on top of trans and two in front . i only have one on top and two in...

ok guys i have a no start thread i did a few days back . problem is no fuel into cylinder. timing is good checked it , i have compression .i have fuel pressure (using ids i get 6.74 mpa cranking) injectors work tested outside they spray. i have spark. i reprogrammed ecu using ids nothing. i have...

ok guys i have a no start thread i did a few days back . problem is no fuel into cylinder. timing is good checked it , i have compression .i have fuel pressure (using ids i get 6.74 mpa cranking) injectors work tested outside they spray. i have spark. i reprogrammed ecu using ids nothing. i have...

i tried adding starting fluid and later on actual gas, and it started to chugg like it was trying to turn over so i thought i flooded cylinders. but it did not catch, so my thought mabye timing which led me to check timing and sensors and what not . but after cancelling out the ckp and cmp...

oh and the passenger motor mount ground is also connected

yes car has been drained of old fuel and cleaned and has fresh batch. i assume i have fuel pressure because i am using mazda ids to monitor fuel as im cranking the engine while having data monitoring , i noticed i got as high as 6.74mpa which is about 997psi ? so pressure is building but when i...

I have gone through almost all no start and had no luck . So long story short I let car sit about 5years I rebuilt engine . Now my problem is it will crank not turn over . I have fuel pressure / compression/ spark. I checked grounds and even added ground wire to run to negative terminals to...